M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Where
<get|put>
- different xmodem file transfer operations – get a file from the server or put
the information on the server
[type=<app|config|oldconf|script|hosts|log>]
– optional type field. This is useful
to specify whether a log file or host file is uploaded or downloaded. This can also
perform the task of exporting a configuration file or uploading a new image to the
switch
Syntax host <add|edit|del> name=<host-name> [ip=<ipaddress>] [user=<user>]
[pass=<password>] – create a host entry for accessing host. This is equivalent to
creating a host table on many systems. Maximum of 10 such entries are allowed
Syntax show host – displays the host table entries
Syntax climode <script|console|show> - set the interactive CLI mode on (console) or off
(script). To see the mode – use the show option
Syntax
more <enable|disable|show>
- enable or disable the scrolling of lines one page at a time
Syntax
show config [module=<module-name>]
– displays the configuration
Syntax
set secrets <hide|show>
-
sets the system parameter to display or hide the passwords
Syntax
kill config [save=module-name]
– resets the system configuration. The module-name option does
not reset the specific module parameters. The modules are
listed below
Other commands
Syntax
configure access
– sets the access parameters (e.g. disable telnet session)
Syntax
show ipconfig
– shows IP parameters set
Syntax
show console
– reviews console settings
Syntax
show serial
– reviews serial settings
Syntax
show setup
– reviews system parameters
Syntax
show sysconfig
– reviews settable system parameters
Syntax
show time
– shows the system time
70
