M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Syntax
configure port-security
– sets the port authorization based on MAC addresses
Syntax
port-security
– configure port security settings
Syntax
allow mac=<address|list|range> port=<num|list|range>
- specify a specific
MAC address or MAC address list
Syntax
learn port=<number-list> <enable|disable>
- learn MAC addresses connected to the
Magnum 6K switch
Syntax
show port-security
– display port security settings
Syntax
action port=<num|list|range> <none|disable|drop>
- action to perform in case of
breach of port security
Syntax
signal port=<num|list|range> <none|log|trap|logandtrap>
- port to monitor
and signal to send in case of breach of port security
Syntax
ps <enable|disable>
- enable or disable port security
Syntax
remove mac=<all|address|list|range> port=<num|list|range>
- remove a
MAC address entry
Syntax
show log [fatal|alert|crit|error|warn|note|info|debug]
– display the log
Syntax
clear log [fatal|alert|crit|error|warn|note|info|debug]
– clear the log
Syntax
set logsize size=<1-1000>
- set the number of line to be collected in the log before the oldest
record is re-written
Syntax
syslog
– syslog context commands
Syntax
server add host=<host|ip> [port=<port>] [event=<all|none|default|list>]
– add a syslog server. Maximum of five servers can be defined
Syntax
server edit id=<id> [host=<host|ip>] [port=<port>]
[event=<all|none|default|list>]
- edit the server setup as well as which syslog messages
the server should receive
Syntax
server del id=<id>
- delete a Syslog server
Syntax
server <enable|disable> id=<id
>
- enable or disable the log messages being sent to a
syslog server
Syntax
syslog <enable|enable>
- enable (or disable) the syslog messages
Syntax
show syslog
– display the syslog settings
Syntax
access
– setup access configuration parameters
Syntax
allow ip=<ipaddress> mask=<netmask> service=<name|list>
- allow specific
IP address or range of addresses as a trusted host(s)
104
