M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Syntax
set serial [baud=<rate>] [data=<5|6|7|8>] [parity=<none|odd|even>]
[stop=<1|1.5|2>] [flowctrl=<none|xonxoff>
]
– sets serial port parameters
Syntax
snmp
– enter the snmp configuration mode
Syntax
setvar [sysname|syscontact|syslocation]=<string>
- sets the system name, contact and
location information
Syntax
set timezone GMT=[+ or -] hour=<0-14> min=<0-59>
- sets the timezone
Syntax
set date year=<2001-2035> month=<1-12> day=<1-31>
[format=<mmddyyyy|ddmmyyyy|yyyymmdd>]
– sets the date and the format in which the
date is displayed
Syntax
set time hour=<0-23> min=<0-59> sec=<0-59>
– sets the time (as well as the timezone)
Syntax
set timeformat format=<12|24>
- sets the display time in the 12/24 hour mode
Syntax
set daylight country=< country name>
- sets the daylight saving time
Syntax
setsntp server = <ipaddress> timeout = <1-10> retry = <1-3>
- setup the SNTP server
Syntax
sync [hour=<0-24>] [min=<0-59>]
– setup the frequency at which the SNTP server is queried
Syntax
sntp [enable|disable]
– enables or disables the SNTP services
Syntax
saveconf mode=<serial|tftp|ftp> [<ipaddress>] [file=<name>]
– saves the
configuration on the network using tftp, ftp or serial protocols
Syntax
loadconf mode=<serial|tftp|ftp> [<ipaddress>] [file=<name>]
– loads the previously
saved configuration from the network using tftp, ftp or serial protocols
Syntax
kill config [save=module_name]
– resets the system configuration. The module_name option does not
reset the specific module parameters. The modules are
system, event, port, bridge, stp, ps, mirror, sntp, vlan, gvrp
and snmp
Syntax
show session
– display telnet sessions active on the switch
Syntax
kill session id=<session>
- kill a specific telnet session
Syntax
set ftp mode=<normal|passive>
- set the ftp mode of operation
Syntax
show ftp
- display the current ftp operation mode
Syntax
ftp <get|put|list|del> [type=<app|config|oldconf|script|hosts|log>]
[host=<hostname>] [ip=<ipaddress>] [file=<filename>] [user=<user>]
[pass=<password>]
– upload and download information using ftp command
68
