background image

Magnum P62-Series Hardened Switches                               Installation and User Guide (05/05)

 

 

 

www  GarrettCom  com

.

.

 

 

      

Managed P62-Series (mP62)  Hardened Switches 

 

Magnum  mP62-AC-2MSC: 

mP62-AC Managed Switch with six10/100 RJ-45 and two 

100Mb FDX fiber multi-mode SC-type ports. Software includes menu-driven user 
interface for ease of use, SNMP, QoS, Telnet, Security, STP, VLAN, BootP/DHCP. Has 
4Knodes address table and 256K packet buffers. AC power input, 85-260vac 47-63Hz 
worldwide auto-ranging, via PSX-A Power Source Extended Temp (a separate unit). Steel 
case used a s a heat sink, designed for use in environmentally challenged location such as 
“outdoors” with extended temperatures. 

Magnum  mP62-AC -1MISSC: 

Same as mP62-AC-2MSC, except one fiber port is 20km 

single-mode SC. (includes PSX-A) 

Magnum  mP62-AC -2SSC: 

Same as mP62-AC-2MSC, except both fiber ports are 20km 

single-mode SC. (includes PSX-A)

  

Magnum  mP62-AC -NOF: 

mP62 –AC Ethernet Switch w/ six 10/100 RJ-45s, no fiber ports 

Magnum  mP62-2MSC: 

mP62-DC Ethernet Switch, six 10/100 RJ-45 and two 100Mb FDX 

fiber multi-mode SC-type ports.

 

Software and buffers same as

 

mP62-AC-2MSC. Dc 

power input,20-60VDC auto-ranging

 

Magnum  mP62-1MISSC: 

Same as mP62-2MSC, except one fiber port is 20km single-mode 

SC. (No PSX unit required) 

Magnum  mP62-2SSC: 

Same as mP62-2MSC, except both  fiber  ports are 20km single-

mode SC. (No PSX unit required) 

Parts 

Magnum  mP62-5V-2MSC*: 

Same as mP62-2MSC, except with 5VDC input using military-

type screw-lock connector 

Magnum  mP62-5V –1M1SSC*: 

Same as mP62-1M1SSC, except w/ 5VDC input using 

military-type screw-lock connector 

 

Magnum  mP62-5V –2SSC*: 

Same as mP62-2SSC, except w/ 5VDC input using military-

type screw-lock connector 

Magnum  mP62-5V-NOF: 

Same as mP62-NOF, except w/ 5VDC input using military-type 

screw-lock connector 

Magnum PSX-5V-CBL (spare): 

2ft. power cord with military –type screw-lock connector, 

spare for PSX to mP62-5V power cord.  

MST Conversion:

 Special Item, convert one standard P62-2MSC w/two MSC fiber ports to 

two MST fiber ports. 

*

PSX unit or equal required to supply 5VDC input

.

 For more information, see the PSX datasheet. 

 

Magnum P62 models with other fiber connector types and combinations available, request quote. 

 
GarrettCom, Inc. reserves the right to change specifications, performance characteristics and / 

or model offerings without notice. 

Содержание Magnum mP62-5V -1M1SSC









































Отзывы: