Magnum 6KL Managed Edge Switch Installation and User Guide
11/09
36
www GarrettCom com
.
.
5.1.8
6KL4-2MT2RJ, 2 x Multimode MTRJ / 2 x RJ45 (Slot C)
The 6KL4-2MT2RJ 4-port Fiber / Copper module provides two 100Mb
Multimode MTRJ Fiber ports and two 10/100Mb switched RJ-45 ports.
The Multimode MTRJ ports support fiber optic cable distances up to the IEEE
standard 100Mbps distance limits, typically 2km at full-duplex.
The 6KL4-2MT2RJ copper ports support Ethernet twisted pair segments of any
standard length. It is equipped with a two-port RJ-45 connector, and offers 10/100 full /
half-duplex auto-negotiating capability on each port. The RJ-45 connector is shielded to
minimize emissions and will allow both unshielded twisted pair (UTP) and shielded
twisted pair (STP) cable connections. When installed in a Magnum 6KL Series Managed
Switch, the copper ports support the standard distance of 100m on each port.
(see Sections 5.1.2 and 5.1.7 for more details)
5.1.9
6KL4-4MSC, -4MST, -4FLST, -2FX2FLMST (Slot C)
4 x SC Multimode or 4 x ST Multimode
The 6KL4-4MSC (shown) 4-port Fiber module provides four 100Mb
Multimode SC Fiber ports. This option utilizes a SC-type “push-pull” fiber optic
connection.
The 6KL4-4MST 4-port Fiber module provides four 100Mb Multimode ST
Fiber ports. This option utilizes a ST-type “twist-lock” fiber optic connection.
The 100Mb Multimode SC and ST ports support fiber optic cable distances up
to the IEEE standard 100Mbps distance limits, typically 2km at full-duplex.
The 6KL4-4FLST 4-port Fiber module provides four 10Mb Multimode ST
Fiber ports. This option utilizes a ST-type “twist-lock” fiber optic connection. The 10Mb
ST-fiber ports allow the user to connect their legacy 10Mb network to the Magnum 6KL
Series switch. It supports distances according to the 10Base-FL standard (up to 2km for
Multimode fiber)
The 6KL4-2FX2FLMST 4-port Fiber module provides two 100Mb Multimode
