GarrettCom Magnum 6K25 Скачать руководство пользователя страница 11

Страница: 11 / 68

Magnum 6K25 Managed Fiber Switch Installation and User Guide (04/06)

www GarrettCom com

1.2 Ordering

Information

Magnum Managed Fiber Switch

MODEL

DESCRIPTION

Magnum 6K25

Magnum 6K25 Managed Fiber Switch, base unit.

May be configured with a selection of 10/100/1000 6K25 fiber and copper port

connector types, 25 total ports max. Wire speed filtering and forwarding across all ports,
802.3x flow control, 802.1p priority packet processing, self-learning 4K-node address
table, large 240KB packet buffers for 10/100 and 120KB for 1000Mb. Plug-and-play
switching services, front-mounted LEDs, internal auto-ranging AC power supply, 19"
rack-mounting brackets. For licensed managed networks software, see MNS materials.

Magnum 6K25R:

“Reverse” model, same as Model 6K25 except the user ports and

the power input connectors are in the rear. Two sets of LEDs (both rear and front) provide
duplicate status data for viewing from either side.

Magnum 6K25-48VDC

: Same as 6K25 except the power input is –48VDC

Magnum 6K25R-48VDC

: Same as 6K25R except the power input is –48VDC

Magnum 6K25-24VDC

: Same as 6K25 except the power input is 24VDC

Magnum 6K25R-24VDC

: Same as 6K25R except the power input is 24VDC

Magnum 6K25-125VDC

: Same as 6K25 except the power input is 125VDC

Magnum 6K25R-125VDC

: Same as 6K25R except the power input is 125VDC

Configuration Options:

Each Magnum 6K25

and 6K25R base unit has four port module slots. The first

three (A,B,C) may be one of the modules below, one (slot D) may only be a Gigabit
module. Select up to four port modules per base unit.

Magnum 6K25 Port Modules

6KP8-MTRJ

SFF Fiber module, w/eight 100Mb mm FX MT-RJ connectors

6KP8-MLC

SFF Fiber module, w/eight 100Mbps mm FX LC connectors

6KP8-SLC

SFF Fiber module, w/eight 100Mbps sgl-m FX LC connectors

6KP8-RJ45

TP Module, w/eight 10/100Mbps auto-negotiating RJ-45 ports

6KP4-F10ST

“2+2”

10Mb

Fiber module, w/ four 10Mb 2km FL ST connectors

6KP4-FXST

“2+2”

100Mb

Fiber module, w/ four 100Mb 2km FX ST connectors

6KP4-FLSTFX

“2+2”

Fiber module, w/ two 100Mb & two 10Mb ports, 2km

6KP8-45MT

“4+4” module, w/four RJ-45 ports and four 2km mm FX MT-RJ’s

6KP8-45LC

“4+4” module, w/four RJ-45 ports and four 2km mm LC connectors

6KP8-45-2MT

“6+2” module, w/six RJ-45 ports and two 2km mm MTRJ connectors

6KP8-45-2SLC

“6+2” module, w/six RJ-45 ports and two 100Mb 15km sgl. mode FX

LC connectors

6KP6-RJMST

“4+2” module, w/four RJ-45 ports and two 2km mm FX SC’s

6KP6-RJMSC

“4+2” module, w/four RJ-45 ports and two 2km mm FX ST‘s

6KP6-RJSSC

“4+2” module, w/four RJ-45 ports and two 20km Sgl.m FX SC’s

6KP6-RJSSCL

“4+2” module, w/four RJ-45 ports and two 40km Sgl.m FX SC’s

6KP6-MT10ST

“4+2” module, w/four MTRJ ports and two 10Mb 2km FL ST’s

6KP6-RJ10ST

“4+2” module, w/four RJ-45 ports and two 10Mb 2km FL ST ‘s

Содержание Magnum 6K25





































































Результаты поиска

Содержание Magnum 6K25

Отзывы:

Похожие инструкции для Magnum 6K25

Бренды по названию

Популярные бренды

GarrettCom Magnum 6K25, Руководство по установке оборудования и инструкция пользователя

Результаты поиска

Содержание Magnum 6K25

Отзывы:

Похожие инструкции для Magnum 6K25

Бренды по названию

Популярные бренды