background image

Magnum 4K16 Switches    Installation and User Guide       

(12/05) 

 

17 

www  GarrettCom  com

.

.

 

1.    Using standard twisted pair media, insert either end of the cable with an RJ-45 

plug into the RJ-45 connector of the port. Note that, even though the connector is 

shielded, either unshielded or shielded cables and wiring may be used.  

2.   Connect the other end of the cable to the corresponding device 

3.   Use the LINK LED to ensure proper connectivity by noting that the LED 

will be illuminated when the unit is powered and proper connection is 
established. 

3.3      Rack-mounting 

 

Installation of a 

Magnum 4K16 Switch in a 

19” rack is a simple 

procedure. The units are 1U (1.70”) high. When properly installed, the front-mounted 

LED status indicators should be in plain view and easy to read. Rack-mount installation 

requires special 19” rack-mounted brackets and screws (included with each 4K16 unit). 

The brackets attach to the front sides of the Switch, which is then fastened into a standard 

19” RETMA rack. 

 

The 23” brackets and ETSI brackets are also available (optional) for rack-

mounting of Magnum 4K Series Switches. The 23” brackets are popular in the Telco 

industry where they are a 

standard for Central Office rack 

mounting purposes. The 23” 

brackets are mainly being used 

for larger equipment assemblies 

in rack-mounting frames, and are 

frequently accessed in operation 

from both sides. 

 

The ETSI (European 

Telephone Standard) brackets 

are similar to the 19” brackets 

but use metric dimensions. 

The optional 23” 

brackets and the ETSI brackets 

come as a pair in a package, 

along with the necessary screws 

for attaching the brackets to the 

sides of the Magnum Switch unit.  

 

Fig 3.3 Multiple Magnum 4K16 units   rack-mounted in a 23” Rack-mount frame 

1         2          3           4          5          6          7          8C          8F                                               9F          9C      10        11         12        13         14       15         16

Col/FDX

Col/FDX

Magnum 4K16-Series

Ethernet 10/100 Switch

F/H

POWER
ERROR

    =   X

L/A

SPEED

F            H

F            H

 

2X   4X       6      8         10       12     14     16       18       20      22     24

 

 1 X        1        3        5        7          9     11        13    15      17    19       21      23

 

Magnum 4024F Switch

100

Col/FDX

Link/Ac

Powe

100

Col/FD

Link/Ac

TX              X                                  TX      

2X   4X       6      8         10       12     14     16       18       20      22     24

 

 1 X        1        3        5        7          9     11        13    15      17    19       21      23

 

Magnum 4024F Switch

100

Col/FDX

Link/Ac

Powe

100

Col/FD

Link/Ac

TX              X                                  TX      

2X   4X       6      8         10       12     14     16       18       20      22     24

 

 1 X        1        3        5        7          9     11        13    15      17    19       21      23

 

Magnum 4024F Switch

100

Col/FDX

Link/Ac

Powe

100

Col/FD

Link/Ac

TX              X                                  TX      

2X   4X       6      8         10       12     14     16       18       20      22     24

 

 1 X        1        3        5        7          9     11        13    15      17    19       21      23

 

Magnum 4024F Switch

100

Col/FDX

Link/Ac

Powe

100

Col/FD

Link/Ac

TX              X                                  TX      

Содержание Magnum 4K16







































Отзывы: