8
Basic Controls
1. Power ON/OFF and MODE
—Hold this button for
1 second to turn power ON or OFF. Once detector
is on, use the Mode button to select a different
detection mode, when desired. Press and hold
this button for five seconds to restore detector to
Factory Settings.
2. Plus/Minus and NOTCH DISC.
Use Plus/Minus
to change settings while using MENU button
controls and to move cursor when changing
Notch Discrimination.
3. Ground Balance/HOLD
—Hold this button down
while ground balancing the detector.
4. Iron Audio
—Allows the user to hear discrimi-
nated iron (normally silenced) in order to avoid
digging tricky, undesired flat iron items such as
bottle caps or steel washers.
5. MENU
—Press to scroll through Menu settings
by continuing to tap this button. Allows access
to Sensitivity, Volume, Iron Volume, Frequency
options, Channel options, Backlight, and Z-Lynk
Wireless pairing.
6. Pinpoint/OPERATE
—Hold this button for pin-
pointing function, which enables fast recovery
with the smallest hole possible. Press and release
OPERATE button to exit Menu settings.
7. Accept/Reject
—Accepts or Rejects targets by
switching on/off individual Discrimination Seg-
ments from the Target ID Legend. Use in conjunc-
tion with the Plus/Minute buttons to move the
cursor above any desired Notch Discrimination
pixel (
see item 2
).
1
2
2
3
4
5
6
7
