background image

General Advice

23

 

Cautions

  When searching for treasure with your Garrett 
detector, observe these precautions:

•  Never trespass or hunt on private property without 

permission.

•  National and state parks / monuments and military 

zones, etc. are absolutely off-limits.

•  Avoid areas where pipelines or electric lines may be 

buried. If found, do not disturb and notify proper 
authorities.

•  Use reasonable caution in digging any target, 

particularly if you are uncertain of the conditions.

•  If you are unsure about using your metal detector 

in any area, always seek permission from the proper 
authorities.

  Caring for Your Apex

  Your Garrett detector is rugged, designed for outdoor 
use. However, as with all electronic equipment, there 
are some simple ways you can care for your detector 
to maintain its high performance.

•   Avoid extreme temperatures as much as possible, 

such as storing the detector in an automobile trunk 
during the summer or outdoors in sub-freezing 
weather.

•  Keep your detector clean. Disassemble the stem 

and wipe it, the control housing, and the searchcoil 
with a damp cloth when necessary.

•   Remember that your searchcoil is submersible, but 

your control housing and connectors are not.

•   Recharge the detector’s battery at least once a year 

if you are not using it regularly.

  Metal Detecting Code of Ethics

  The following is a Code of Ethics that many treasure 
hunters and clubs follow to preserve our exciting sport 
of metal detecting.  We encourage you to do the same:

•  I will respect private and public property, all 

historical and archaeological sites and will do no 
metal detecting on these lands without proper 
permission.

•  I will keep informed on and obey all local and 

national legislation relating to the discovery and 
reporting of found treasures.

•  I will aid law enforcement officials whenever 

possible.

•  I will cause no willful damage to property of any 

kind, including fences, signs and buildings.

•  I will always fill the holes I dig.

•  I will not destroy property, buildings or the remains 

of deserted structures.

•  I will not leave litter or other discarded junk items 

lying around.

•  I will carry all rubbish and dug targets with me 

when I leave each search area.

•  I will observe the Golden Rule, using good outdoor 

manners and conducting myself at all times in a 
manner which will add to the stature and public 
image of all people engaged in the field of metal 
detection. 

Содержание MULTI-FLEX ACE APEX



























Отзывы: