GARO Twinbox GTB Series Скачать руководство пользователя страница 3

INFORMATION

INFORMATION

Warnings

GARO GTB assortment is a range of EVSE stations for Mode-3 
AC charging.
Below are some example of standard features:

•  Double outlets or cables for Mode-3 EV charging.
•  Up to 2x22kW simultaneous charging from one EVSE 

depending on model.

•  RCCB with DC-fault monitoring for each side.
•  Internal static DLM (Dynamic Load Management).
•  Remote control function for activated charging.
•  Double mains terminals for easy forwarding of mains cable to 

next GTB.

•  Suitable for installation on wall or pole.
•  LED status indication.
•  Upgradeable firmware

Some models also have:
•  Energy meters for each side
•  Communication module for Wifi/LAN functions
•  RFID readers

General functions:

•  Install and administrate RFID readers
•  Connect mobile/tablet/PC to webinterface
•  Activate scheduled charging via webinterface
•  Schedule for electric current limitation via webinterface
•  Install external energy-meter for advanced DLM
•  Connect up to 16pcs GTB in a cluster for advanced DLM
•  Update firmware via webinterface

Some functions require specific installed hardware ie 
communication module.

For full user manual: www.garoemobility.com/support

Dielectric Voltage Withstand Test is not allowed on GTB 
Twinbox

This equipment should not be used by anyone (including 
children) with reduced physical, sensory or mental 
capacity, or anyone lacking in experience or knowledge, 
unless they are provided with supervision or prior 
instruction in how to use the equipment by the person 
responsible for their safety.

The GTB Twinbox range of charging stations is designed 
exclusively for charging electric vehicles.

The GTB Twinbox must be grounded according to local 
country installation requirements.

Do not install or use the GTB Twinbox near flammable, 
explosive, harsh, or combustible materials, chemicals, or 
vapors.

Turn off the electrical power at the circuit breaker before 
installing, configuring or cleaning of the GTB Twinbox.

Use the GTB Twinbox only within the specified 
parameters.

Never spray water or any other liquid directly at the GTB 
Twinbox. Never spray any liquid onto the charge handle 
or submerge the charge handle in liquid. Store the charge 
handle in the dock to prevent unnecessary exposure to 
contamination or moisture.

Do not use this equipment if it appears to be damaged or 
if the charging cable appears to be damaged.

Do not modify the equipment installation or any part of the 
product.

Do not touch the terminals with fingers or any other 
objects.

Do not insert foreign objects into any part of the GTB 
Twinbox.

About this manual

This document contains general descriptions which are verified to be accurate at the time of printing. However, because continuous 
improvement is a goal at GARO, we reserve the right to make product and software modifications at any time. This range is subject to 
continual product development. Errors, typo and omissions excepted.
Latest manual can always be found at http://garoemobility.com/support

3

EN

Содержание Twinbox GTB Series




































Отзывы: