Page 3-2
GTX 23 Installation Manual
Revision A
190-00906-01
Table 3-2 Recommended Crimp Tools
1. Non-Garmin part numbers shown are not maintained by Garmin and consequently are subject to
change without notice.
2. Extracting 18 AWG contacts requires that the expanded wire barrel be cut off from the contact. It may
also be necessary to push the pin out from the face of the connector when using an extractor due to the
absence of the wire. A new contact must be used when reassembling the connector.
3.4 Backshell Assembly
The GTX 23 connector kit includes one Garmin backshell assembly. Garmin’s backshells give the installer
the ability to quickly and easily terminate shield grounds at the backshell housing.
Refer to Appendix B for Shield Block Installation Instructions.
3.5 Weight and Balance
Weight and balance computation is required after the installation of the GTX 23. Follow the guidelines as
established in AC 43.13-1B, Chapter 10, Section 2. Make appropriate entries in the equipment list
indicating items added, removed or relocated along with the date accomplished. Include your name and
certificate number in the aircraft records. Section 1.7.1 identifies the weight of the new GTX 23
equipment and the drawings in Appendix D shows the center of gravity.
3.6 Electrical Load Analysis
An electrical load analysis should be completed on each aircraft prior to installation in accordance with
AC43.13-1B, Chapter 11. Use the following values for computation:
Table 3-3 Unit Power Loads
Manufacturer
Hand
Crimping Tool
18 AWG
20-24 AWG
Positioner
Insertion/
Extraction Tool
Positioner
Insertion/
Extraction Tool
Military P/N
M22520/2-01
N/A
M81969/1-04
M22520/2-09
M81969/1-04
Positronic
9507
9502-11
M81969/1-04
9502-3
M81969/1-04
ITT Cannon
995-0001-584
N/A
N/A
995-0001-739
N/A
AMP
601966-1
N/A
91067-1
601966-6
91067-1
Daniels
AFM8
K774
M81969/1-04
K42
M81969/1-04
Astro
615717
N/A
M81969/1-04
615725
M81969/1-04
CAUTION
GTX 23 Input
14 Vdc
28 Vdc
Typical
Max.
Typical
Max.
GTX 23 Main Power
1.6 A
3.1 A
0.85 A
1.6 A
Содержание GTX 23 ES
