Garmin GTN 625Xi, Руководство пилота

Страница: 388 / 534

5-80 Pilot’s Guide 190-02327-03 Rev. C
Hazard Awareness
TCAD 9900B PAGE SELECTIONS
•
Set local barometric pressure: Tap
BARO
and specify a barometric pressure
value.
•
Set the active shield: Tap Active Shield and choose En route, Standard,
or Terminal.
TCAD 9900B MENU SELECTIONS
SHIELD SETUP
The Shield Setup function allows you to set the type (mode of operation) and volume
of the shield that will provide alerts when entered by other aircraft.
Set an approach shield:
1. Select En route, Standard, or Terminal
2. Ensure Use DEST APT is deselected and then tap Field Elevation .
3. Specify the field elevation value for traffic reporting.
Set an En Route, Standard, or Terminal shield:
1. Tap Shield Type and select the preferred shield type.
2. Tap Shield Height and specify the shield height value.
3. Tap Shield Range and specify the shield range value.
Select a mode:
•
Approach mode:
Toggle the
Approach
key to choose between Set, Armed,
or Active.
•
Ground mode: Toggle the Ground key on or off.
Traffic Audio
Set volume level of traffic alerts.
Shield Setup
Set the active shield. Options are Approach or Standard.
Approach Mode
Set the shield height.
Shield Range
Set the shield range.
Use DEST APT to automatically use the field elevation of the destination airport
of the active flight plan for traffic reporting. If a destination airport is not present
in the GTN Xi system, TCAD will not receive a field elevation and therefore not
automatically enter approach mode.