Garmin GPSMAP 8500, Руководство пользователя

Страница: 43 / 66

For information on placing distress calls from your radio, see the
VHF radio owner’s manual. For information about marking an
MOB or SOS location, see Marking an SOS Location , page 13 .
Position Tracking
When you connect the chartplotter to a VHF radio using NMEA
0183, you can track vessels that send position reports.
This feature is also available with NMEA 2000, when the vessel
sends the correct PGN data (PGN 129808; DSC Call
Information).
Every position report call received is logged in the DSC list
( DSC List , page 34 ).
Viewing a Position Report
1
Select Info > DSC List .
2
Select a position-report call.
3
Select Review .
4
Select an option:
• To switch to a Navigation chart marking the location,
select Next Page .
• To view the position report details, select Previous Page .
Navigating to a Tracked Vessel
1
Select Info > DSC List .
2
Select a position-report call.
3
Select Review > Navigate To .
4 Select Go To or Route To .
Creating a Waypoint at the Position of a Tracked
Vessel
1 Select Info > DSC List .
2
Select a position-report call.
3
Select Review > Create Waypoint .
Editing Information in a Position Report
1 Select Info > DSC List .
2 Select a position-report call.
3
Select Review > Edit .
• To enter the name of the vessel, select Name .
• To select a new symbol, select Symbol , if available.
• To enter a comment, select Comment .
• To show a trail line for the vessel if your radio is tracking
the position of the vessel, select Trail .
• To select a color for the trail line, select Trail Line .
Deleting a Position-Report Call
1
Select Info > DSC List .
2
Select a position-report call.
3 Select Review > Clear Report .
Viewing Vessel Trails on the Chart
You can view trails for all tracked vessels on some chart views.
By default, a black line indicates the path of the vessel, a black
dot indicates each previously reported position of a tracked
vessel, and a blue flag indicates the last reported position of the
vessel.
1 From a chart or 3D chart view, select Menu > Layers >
Other Vessels > DSC > DSC Trails .
2
Select the number of hours to show tracked vessels on the
chart.
For example, if you select 4 Hours, all trail points that are
less than four hours old appear for all tracked vessels.
Individual Routine Calls
When you connect the chartplotter to a Garmin VHF radio, you
can use the chartplotter interface to set up an individual routine
call.
When setting up an individual routine call from your chartplotter,
you can select the DSC channel on which you want to
communicate. The radio transmits this request with your call.
Selecting a DSC Channel
NOTE: The selection of a DSC channel is limited to those
channels that are available in all frequency bands. The default
channel is 72. If you select a different channel, the chartplotter
uses that channel for subsequent calls until you call using
another channel.
1
Select Info > DSC List .
2
Select a vessel or a station to call.
3
Select Review > Call with Radio > Channel .
4
Select an available channel.
Making an Individual Routine Call
NOTE: When initiating a call from the chartplotter, if the radio
does not have an MMSI number programmed, the radio will not
receive call information.
1
Select Info > DSC List .
2
Select a vessel or a station to call.
3 Select Review > Call with Radio .
4 If necessary, select Channel , and select a new channel.
5
Select Send .
The chartplotter sends information about the call to the radio.
6
On your Garmin VHF radio, select Call .
Making an Individual Routine Call to an AIS Target
1
From a chart or 3D chart view, select an AIS target.
2 Select AIS Vessel > Call with Radio .
3 If necessary, select Channel , and select a new channel.
4
Select Send .
The chartplotter sends information about the call to the radio.
5
On your Garmin VHF radio, select Call .
Gauges and Graphs
The gauges and graphs provide various information about the
engine and environment. To view the information, a compatible
transducer or sensor must be connected to the network.
Viewing the Gauges
1
Select A/V, Gauges, Controls .
2
Select a gauge.
3
Select or to view a different gauge page.
Changing the Data Shown in a Gauge
1
From a gauges screen, hold a gauge.
2
Select Replace Data .
3
Select a data type.
4
Select the data to display.
Customizing the Gauges
You can change the layout of the gauge pages, how the gauges
pages are displayed, and the data in each gauge.
1
Open a gauge page.
2
Select Menu > Edit Gauge Pages .
3 Select an option:
• To change the data shown in a gauge, select the gauge.
Gauges and Graphs 35