background image

GPSMAP

®

 8500 Installation 

Instructions

The GPSMAP 8500 is a highly customizable marine navigation 

and information system. These instructions will explain the 

connections between the various components of the system so 

you can plan and install the best system for your boat.
In addition, these instructions will cover the mounting and wiring 

of the primary GPSMAP 8500 device.

Important Safety Information

 WARNING

See the 

Important Safety and Product Information

 guide in the 

product box for product warnings and other important 

information.
When connecting the power cable, do not remove the in-line 

fuse holder. To prevent the possibility of injury or product 

damage caused by fire or overheating, the appropriate fuse 

must be in place as indicated in the product specifications. In 

addition, connecting the power cable without the appropriate 

fuse in place will void the product warranty.

 CAUTION

Always wear safety goggles, ear protection, and a dust mask 

when drilling, cutting, or sanding.

NOTICE

When drilling or cutting, always check what is on the opposite 

side of the surface.

Registering Your Device

Help us better support you by completing our online registration 

today.
• Go to 

http://my.garmin.com

.

• Keep the original sales receipt, or a photocopy, in a safe 

place.

Contacting Garmin Product Support

• Go to 

www.garmin.com/support

 and click 

Contact Support 

for in-country support information.

• In the USA, call (913) 397.8200 or (800) 800.1020.
• In the UK, call 0808 2380000.
• In Europe, call +44 (0) 870.8501241.

Understanding the Components

The GPSMAP 8500 system can be set up in different ways, depending on your needs and the layout of your boat.
The GPSMAP 8500 is the brain of a GPSMAP 8500 system and it connects to other devices and GPSMAP 8500 systems on your 

boat. The GPSMAP 8500 can be controlled by a connected GMM™ monitor, a connected GRID™ input device, or combination of 

the two.

December 2012

190-01558-02_0A

Printed in Taiwan

Содержание GPSMAP 8500 Black Box













Отзывы: