background image

Item

Description

Â

NMEA 0183-compliant device

Ã

NMEA 0183 cable

Item

Garmin Wire Function

Garmin Wire Color

NMEA 0183 Device Wire Function

Ê

Power

Red

Power

Ë

Power ground

Black

Power ground

Ì

Data ground

Black

Data ground

Í

RxB (-)

Orange/white

N/A

Î

RxA (+)

White

TxA (+)

Lamp or Horn Connections

The device can be used with a lamp, a horn, or both, to sound 

or flash an alert when the chartplotter displays a message. This 

is optional, and the alarm wire does not need to be used in 

order for the device to function normally. When connecting the 

device to a lamp or horn, observe these considerations.
• The alarm circuit switches to a low-voltage state when the 

alarm sounds.

• The maximum current is 100 mA, and a relay is needed to 

limit the current from the chartplotter to 100 mA.

• To manually toggle visual and audible alerts, you can install 

single-pole, single-throw switches.

Item Description

À

10–35 Vdc power source

Á

Power cable

Â

Horn

Ã

Lamp

Ä

NMEA 0183 cable

Å

Relay (100 mA coil current)

Æ

Toggle switches to enable and disable lamp or horn alerts

Item

Wire Color

Wire Function

Ê

Red

Power

Ë

Black

Ground

Ì

Yellow

Alarm

Video Input and Output Considerations

The GPSMAP 8500 allows video input from four composite 

sources, and video output to two digital or analog displays. 

When connecting video input and output sources, observe 

these considerations.
• The four composite-video ports are labeled CVBS 1 IN, 

CVBS 2 IN, CVBS 3 IN, and CVBS 4 IN.
◦ These four ports use BNC connectors. You can use a 

BNC to RCA adapter to connect a composite-video 

source with RCA connectors to these ports.

◦ The video from sources connected to these ports is 

available only for display on the GMM or on an additional 

monitor connected to the same GPSMAP 8500. 

Composite video is not shared across the Garmin Marine 

Network or NMEA 2000 network.

• The two DVI-I output ports are labeled MAIN DVI-I VIDEO 

OUT and MIRROR DVI-I VIDEO OUT. These two ports use 

DVI-I connectors, and are compatible with a variety of digital 

and analog connectors and adapters.
◦ You can use a DVI-D cable to connect to a GMM or other 

DVI-compatible digital display. If needed, you can use a 

DVI-D to HDMI adapter to connect to an HD TV or other 

HDMI-compatible display.

◦ You can use a DVI-I cable to connect to a computer 

monitor or other DVI-I-compatible display. If needed, you 

can use a DVI-I to VGA adapter to connect to a VGA-

compatible display.

• The MAIN DVI-I VIDEO OUT port is designed for use with 

the primary GMM. See 

page 4

 for more information. A third-

party monitor can be connected to this port, but will not allow 

for touchscreen interface with the device.

• The MIRROR DVI-I VIDEO OUT port allows you to view a 

mirror image of the MAIN DVI-I VIDEO OUT on a connected 

display.

10

Содержание GPSMAP 8500 Black Box













Отзывы: