manualshive.com logo in svg

Garmin GPSMAP 84 Series, Руководство пользователя, Страница: 170 / 204

Поделиться
Скачать
Garmin GPSMAP 84 Series Скачать руководство пользователя страница 170

Marine Network

The Marine Network allows you to share data from Garmin peripheral devices with the chartplotters quickly and 
easily. You can connect a chartplotter to the Marine Network to receive data from and share data with other 
devices and chartplotters that are compatible with the Marine Network.
Select Settings > Communications > Marine Network.

Setting Alarms

 CAUTION

The Beeper setting must be turned on to make alarms audible (

Sounds and Display Settings, page 152

). Failure 

to set audible alarms could lead to injury or property damage.

Navigation Alarms

Select Settings > Alarms > Navigation.
Arrival: Sets an alarm to sound when you are within a specified distance or time from a turn or a destination.
Anchor Drag: Sets an alarm to sound when you exceed a specified drift distance while anchored.
Off Course: Sets an alarm to sound when you are off course by a specified distance.
Boundary Alarms: Disables and enables all boundary alarms.

Setting the Anchor Drag Alarm

You can set an alarm to sound if you have moved more than an allowable distance. This is very useful when 
anchoring overnight.
1 Select Settings > Alarms > Navigation > Anchor Drag.
2 Select Alarm to turn on the alarm.
3 Select Set Radius, and select a distance on the chart.
4 Select Back.

System Alarms

Alarm Clock: Sets an alarm clock.
Unit Voltage: Sets an alarm to sound when the battery reaches a specified low voltage.
GPS Accuracy: Sets an alarm to sound when the GPS location accuracy falls outside the user-defined value.

158

Device Configuration

Содержание GPSMAP 84 Series













































































































































































































Отзывы:

Нет отзывов