U
NIT
O
PERATION
>
S
ETUP
P
AGES
Rino
®
520/530 Owner’s Manual
81
Units Setup Page
The Units features are best used by individuals with a
working knowledge of map grids and datums. To learn
more about these subjects, visit the National Imagery and
Mapping Agency at
or inquire at your local library.
To access the Units Setup
page:
1. Press the
Page/Quit
button or
the
Main Page
button to open
the Main Menu.
2. In the Main Menu, scroll down
and select
Setup
.
3. Select the
Units
icon to open the Units Setup
page.
Position Format
—Allows you to choose from different
grid formats. The default position format, ‘hddd°mm.
mmm’ displays the latitude and longitude in degrees and
minutes and is most commonly used.
LORAN TD Format
When creating new waypoints using LORAN TD
coordinates, you must set the correct LORAN chain
number and secondary stations in the Setup TD field
before storing the waypoint. After the waypoint is
stored in unit memory, it always
references the LORAN chain
number and secondary stations
currently selected in the Setup
TD field. If you enter a different
LORAN chain number, change the
secondary stations, or offsets in the
Setup TD field, the active waypoint
information reflects those changes. Because the unit
does not rely on the LORAN signal for navigation, it can
reference a different GRI chain and/or secondary stations
and still navigate to the location stored in memory.
To adjust the settings, select
Loran TD
as the Position
Format to open the Loran TD setup window. To change
the settings of any fields, highlight the field, press the
Thumb Stick
In. When done, highlight
Save
and press In.
Units Setup Page
Loran TD Setup
Содержание GPSMAP 520 - Marine GPS Receiver
Страница 1: ...owner s manual Rino 520 530 2 way radio GPS ...
Страница 130: ......
Страница 131: ......