Garmin GPSMAP 520 - Marine GPS Receiver Скачать руководство пользователя страница 121

Страница: 121 / 132

Interface Information

Interface formats are selected in the Setup Interface Page.

See also the “MapSource Setup” section of this Appendix

for information on using the Rino 520/530 with MapSource.

The input/output lines on your Rino 520/530 unit can be

made RS232 compatible by using the optional RS232 PC

Interface Cable accessory available from Garmin, in order

to interface to a wide range of external devices, including

PCs, differential beacon receivers, marine autopilots, or a

second GPS receiver. Refer to the Garmin web site

www.

garmin.com

for the RS232 Cable Accessory ordering

information.
The NMEA 0183 version 3.01 interface format is

supported by the Rino 520/530 and enables the unit to

drive up to three NMEA devices.

NMEA 0183 Version 3.01 Approved Sentences:

GPGGA, GPGLL, GPGSA, GPGSV, GPRMB, GPRMC,

GPRTE, GPVTG, GPWPL, GPBOD

GARMIN Proprietary Sentences:

PGRME (estimated error), PGRMM (datum string),

PGRMZ (altitude), PSLIB (beacon receiver control)
DGPS (Differential GPS) corrections are accepted in

RTCM-SC-104 version 2.0 format through the ‘Data

IN’ line. The Garmin GBR 21 and GBR 23 are the

recommended beacon receivers for use with the Rino

520/530. Other beacon receivers with the correct RTCM

format may be used, but may not correctly display status

or allow tuning control from the GPS unit.

111

Rino

520/530 Owner’s Manual

PPENDIX

NTERFACE

NFORMATION

Содержание GPSMAP 520 - Marine GPS Receiver





































































































































Результаты поиска

Содержание GPSMAP 520 - Marine GPS Receiver

Отзывы:

Похожие инструкции для GPSMAP 520 - Marine GPS Receiver

Бренды по названию

Популярные бренды

Garmin GPSMAP 520 - Marine GPS Receiver, Руководство пользователя

Результаты поиска

Содержание GPSMAP 520 - Marine GPS Receiver

Отзывы:

Похожие инструкции для GPSMAP 520 - Marine GPS Receiver

Бренды по названию

Популярные бренды