background image

© 2006-2010 Garmin Ltd. or its subsidiaries

This manual reflects the operation of Main System Software version 2.00, 3.00, 4.00, or later. Some differences in operation may be observed when comparing 
the information in this manual to earlier or later software version. 

All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored 
in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of 
this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that 
such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial 
distribution of this manual or any revision hereto is strictly prohibited. 

Information in this document is subject to change without notice.  Garmin reserves the right to change or improve its products and to make changes in the 
content without obligation to notify any person or organization of such changes or improvements. Visit the Garmin Web site (

www.garmin.com

) for current 

updates and supplemental information concerning the use and operation of this and other Garmin products. 

Garmin®, GPSMAP®, AutoLocate®, TracBack®, Apollo, SafeTaxi®, FliteChart®, and MapSource® are registered trademarks of Garmin Ltd. or its sub-
sidiaries and may not be used without the express permission of Garmin. NavData® is a trademark of Jeppesen, Inc.; XM® is a registered trademark of XM 
Satellite Radio, Inc. 

January 2010 

Part Number 190-00356-01 Rev F 

Printed in the USA

Power and Comm

Volume/Squelch

Comm Freq

Flip/Flop

Photocell for

Auto-Dimming

Nav Freq

Window

Comm Freq

Window

Graphic Moving

Map Display and

Navigation Info

Range Keys

Direct-To Key

Menu Key

Clear Key

Enter Key

Waypoint and 

arrival alerts, turn 

advisories, function, 

and page number

Large Knob

Small Knob

(Cursor - Press to 

activate)

Procedure Key

Flight Plan 

 Key

Message 

 Key

OBS

 Key

CDI

 Key

Cam

Lock

Navigation 

Source: GPS, 

VLOC, or 

GPS-PTK

Terrain, Flight 

Phase, and 

GPS Integrity 

Annunciator

Small Knob 

Comm/VLOC 

Freq (kHz)

Large Knob 

Comm/VLOC 

Freq (MHz)

Nav Radio Freq Flip/Flop

Nav Radio 

Volume

Aviation Database Card

Terrain Database Card

Содержание GNS 420AW

























Отзывы: