2-28
Pilot’s Guide
190-02488-01 Rev. B
Get Started
Transfer Frequency to Active (Flip-Flop)
COM ACTIVE FREQUENCY WINDOW
XFER KEY
CONTROL KNOB
Before
The transfer (or
flip-flop
) function
allows you to swap the active and
standby frequency values.
This function is accessible multiple
ways.
After
Tapping this window swaps the active frequency value with
the standby frequency displayed in the lower window.
Tap once to swap the displayed frequency values. Tap again
to swap them back.
A transfer icon indicates that flip-flop
functionality is available.
Tapping this key on the COM Standby control panel performs the
same function as tapping the COM active frequency window.
Pushing and holding the control knob for 0.5 seconds
automatically flip-flops the active and standby frequency
values.
•
“Hold for flip-flop” control label appears in the
annunciator bar
•
Standby and active COM frequency values swap
Содержание GNC 355
