GMA 347 Installation Manual
Page 2-7
190-00325-01
Revision A
2.9
GMA 347 Mounting
The GMA 347 mounting surface must be capable of providing structural support and electrical bond to
the aircraft to minimize radiated EMI and provide protection from High-Intensity Radiation Fields
(HIRF).
The GMA 347 is mounted using it’s own system rack. Figure 2
-
1 shows the GMA 347 unit rack.
1
Slide the unit into the rack until the
front lobe of the unit touches the rack
.
2
Insert a 3/32” hex wrench into the access hole on the faceplate.
3
Turn the hex wrench clockwise until the unit is secured in the rack. Continue turning until
tight. Do not over-tighten
the screw
.
4
To remove the unit from the rack, turn the hex wrench counterclockwise until it disengages
from the rack.
Figure 2-1. GMA 347 Unit Rack (115-00427-00)
Содержание GMA 347
Страница 4: ...Page ii GMA 347 Installation Manual Revision A 190 00325 01 This page intentionally left blank ...
Страница 10: ...Page viii GMA 347 Installation Manual Revision A 190 00325 01 This page intentionally left blank ...
Страница 24: ...Page 2 8 GMA 347 Installation Manual Revision A 190 00325 01 This page intentionally left blank ...
Страница 52: ...Page 4 14 GMA 347 Installation Manual Revision A 190 00325 01 This page intentionally left blank ...