Garmin GFL 10 Скачать руководство пользователя страница 5

GFL 10 Installation and Configuration Instructions 

Configuring the NMEA 2000 Tank Capacity

You can indicate the capacity of the fluid tank that the GFL 10 adapter is associated with.

1.  From the NMEA 2000 Devices list, select the GFL 10 device.
2.  Select an option:

For most Garmin chartplotters, select 

Review

 > 

N2K Tank Capacity

.

For other Garmin marine devices, select 

Config

 > 

N2K Tank Capacity

.

3.  Select the tank capacity.
4.  Select 

Done

.

Calibrating the Fluid Level

To use the GFL 10 adapter, you must calibrate the fluid level of the tank that the adapter is 

associated with, using a minimum of two calibration points. The greater the number of fluid 

calibration points, the greater the accuracy of the reading on the fluid-level gauge.

1.  Turn the boat ignition key to the On position (not Start).
2.  From the NMEA 2000 Devices list, select the GFL 10 device.
3.  Select an option:

For most Garmin chartplotters, select 

Review

 > 

Level Calibration

 > 

Add Calibration 

Point

.

For other Garmin marine devices, select 

Config

 > 

Level Calibration

 > 

Add Calibration 

Point

.

4.  Select the percentage of fluid currently in the tank, based on the total tank capacity.

5.  Select 

Done

.

6.  Change the level of the fluid in the tank.

7.  Select 

Add Calibration Point

.

8.  Select the percentage of fluid currently in the tank, based on the total tank capacity.

9.  Select 

Done

.

10. Repeat steps 6 through 9 to add additional, optional fluid-level calibration points.

Troubleshooting the Tank Number

If multiple GFL 10 adapters are assigned to the same NMEA 2000 fluid type, each adapter is 

assigned a unique tank number automatically. If the “Invalid NMEA 2000 tank configuration” 

error message appears, you must assign a unique tank number to each adapter.
For example, if two adapters are assigned the NMEA 2000 fluid type value of Live Well and the 

error message appears, you must assign each adapter a unique tank number. 

1.  From the NMEA 2000 Devices list, select the GFL 10 device.
2.  Select an option:

For most Garmin chartplotters, select 

Review

 > 

Tank Number

.

For other Garmin marine devices, select 

Config

 > 

Tank Number

.

3.  Select a tank number.
4.  Select 

OK

.



Содержание GFL 10











Отзывы: