![Garmin G1000 Diamond DA62 Скачать руководство пользователя страница 598](http://html1.mh-extra.com/html/garmin/g1000-diamond-da62/g1000-diamond-da62_pilots-manual_4327489598.webp)
Garmin G1000 Pilot’s Guide for the Diamond DA62
190-01895-00 Rev. A
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
584
APPENDIX B
DATABASE MANAGEMENT
The system uses Secure Digital (SD) cards to load and store various types of data. For basic flight operations,
SD cards are required for database storage as well as Jeppesen navigation and ChartView database updates. Not
all SD cards are compatible with the G1000. Use only SD cards supplied by Garmin or the aircraft manufacturer.
NOTE:
Loading a database in the system prior to its effective date will result in the expiration date on the
power-up screen and the effective date on the AUX-System Status Page being displayed in yellow.
NOTE:
Garmin requests the flight crew report any observed discrepancies related to database information.
These discrepancies could come in the form of an incorrect procedure; incorrectly identified terrain, obstacles
and fixes; or any other displayed item used for navigation or communication in the air or on the ground. Go
to FlyGarmin.com and select “Aviation Data Error Report.
JEPPESEN DATABASES
The Jeppesen navigation database is updated on a 28-day cycle. The ChartView database is updated on a
14-day cycle. If the ChartView database is not updated within 70 days of the expiration date, ChartView will
no longer function. Both of these databases are provided directly from Jeppesen.
NOTE:
The Jeppesen aviation navigation database is now referred to as the ‘navigation database’. Previously
this database had been referred to as the ‘aviation database’.
The ChartView database should be copied to the Garmin supplied Supplemental Data Card which will reside
in the bottom card slot on the MFD. The navigation database must be installed from the Jeppesen or user
supplied SD data card. Contact Jeppesen (www.jeppesen.com) for subscription and update information.
NOTE:
After the navigation database is installed, the card may be removed.
Updating the Jeppesen navigation database:
1)
Copy the new navigation database to an SD card obtained from Garmin, or the aircraft manufacturer.
2)
With the G1000 system OFF, insert the SD card containing the new navigation database version into the top
card slot of the MFD (label of SD card facing left).
3)
Turn the G1000 system ON. A prompt similar to the following illustration is displayed:
Figure B-1 Navigation Database Load Prompt
4)
Press the
YES
Softkey to update the navigation database in the MFD.
Содержание G1000 Diamond DA62
Страница 2: ......
Страница 14: ...Garmin G1000 Pilot s Guide for the Diamond DA62 190 01895 00 Rev A x TABLE OF CONTENTS Blank Page...
Страница 629: ......