Garmin G1000 Pilot’s Guide for the Diamond DA62
190-01895-00 Rev. A
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
574
APPENDIX A
Message Advisory
Comments
MFD1 DB ERR
– MFD1 Airport
Directory database error exists.
The MFD detected a failure in the Airport Directory database. Ensure that the data
card is properly inserted. Replace data card. If problem persists, the system should be
serviced.
MFD1 DB ERR
– MFD1 multiple
database errors exists.
The MFD detected a failure in more than one database. If problem persists, the
system should be serviced.
PFD1 DB ERR
– PFD1 multiple
database errors exists.
The MFD PFD detected a failure in more than one database. If problem persists, the
system should be serviced.
DB MISMATCH
– Navigation
database mismatch. Xtalk is off.
The PFD and MFD have different navigation database versions or types installed.
Crossfill is off. Check the AUX-SYSTEM STATUS Page to determine versions or regions.
Also, check the AUX-SYSTEM STATUS Page for a database sychronization function not
completed. After sychronization is complete, power must be turned off, then on.
DB MISMATCH
– Standby Navigation
database mismatch.
The PFD and MFD have different standby navigation database versions or types
installed. Check the AUX-SYSTEM STATUS Page to determine versions or regions.
Also, check the AUX-SYSTEM STATUS Page for a database sychronization function not
completed. After sychronization is complete, power must be turned off, then on.
DB MISMATCH
– Terrain database
mismatch.
The PFD and MFD have different terrain database versions or types installed. Check
the AUX-SYSTEM STATUS Page to determine versions or regions. Also, check the AUX-
SYSTEM STATUS Page for a database sychronization function not completed. After
sychronization is complete, power must be turned off, then on.
DB MISMATCH
– Obstacle database
mismatch.
The PFD and MFD have different obstacle database versions or types installed. Check
the AUX-SYSTEM STATUS Page to determine versions or regions. Also, check the AUX-
SYSTEM STATUS Page for a database sychronization function not completed. After
sychronization is complete, power must be turned off, then on.
DB MISMATCH
– Airport Terrain
database mismatch.
The PFD and MFD have different airport terrain database versions or types installed.
Check the AUX-SYSTEM STATUS Page to determine versions or regions. Also, check
the AUX-SYSTEM STATUS Page for a database sychronization function not completed.
After sychronization is complete, power must be turned off, then on.
GIA 63W INTEGRATED AVIONICS UNIT
Message Advisory
Comments
GIA1 CONFIG
– GIA1 config error.
Config service req’d.
The GIA1 and/or GIA2 configuration settings do not match backup configuration
memory. The G1000 system should be serviced.
GIA2 CONFIG
– GIA2 config error.
Config service req’d.
GIA1 CONFIG
– GIA1 audio config
error. Config service req’d.
The GIA1 and/or GIA2 have an error in the audio configuration. The G1000 system
should be serviced.
GIA2 CONFIG
– GIA2 audio config
error. Config service req’d.
GIA1 COOLING
– GIA1 temperature
too low.
The GIA1 and/or GIA2 temperature is too low to operate correctly. Allow units to
warm up to operating temperature.
GIA2 COOLING
– GIA2 temperature
too low.
Содержание G1000 Diamond DA62
Страница 2: ......
Страница 14: ...Garmin G1000 Pilot s Guide for the Diamond DA62 190 01895 00 Rev A x TABLE OF CONTENTS Blank Page...
Страница 629: ......