Garmin G1000 Pilot’s Guide for the Diamond DA62
190-00-01895-00 Rev. A
366
HAZARD AVOIDANCE
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
s
ectoR
s
can
1)
While in horizontal scan mode, press the
BRG
Softkey to display the Bearing Line and place the cursor in the
BEARING field. If the Bearing Line is not displayed, press the
MENU
Key and turn the large
FMS
Knob to select
Show Bearing Line.
2)
Press the
ENT
Key.
Figure 6-111 Selecting Sector Scan Position
3)
Turn the small
FMS
Knob to place the Bearing Line in the desired position. The location of the Bearing Line
becomes the center point of the Sector Scan.
4)
Turn the large
FMS
Knob to place the cursor in the SECTOR SCAN field.
5)
Turn the small
FMS
Knob to select FULL, 60˚, 40˚, or 20˚ scan.
6)
If desired, readjust the Bearing Line as discussed previously to change the center of the Sector Scan.
7)
Press the
BRG
Softkey again to remove the Bearing Line and cursor. The bearing reference is reset to 0º.
Содержание G1000 Diamond DA62
Страница 2: ......
Страница 14: ...Garmin G1000 Pilot s Guide for the Diamond DA62 190 01895 00 Rev A x TABLE OF CONTENTS Blank Page...
Страница 629: ......