Garmin Fishfinder 160 Blue Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 50

background image

9

Installation

Testing the Installation

Testing the Installation

While it is possible to perform some checks with the boat trailered, the

boat should be in the water to properly test the installation.

Press the

POWER

button and the Fishfinder 160 Blue should power

on. If the unit fails to power on, verify that the wiring adapter is seated
properly in the back of the unit, the Red and Black wires are connected to
the correct polarity, and the 2-Amp fuse is installed and not blown. If the
unit is connected to a power supply that exceeds 18 VDC, a ‘Battery Voltage
High’ warning will be displayed and the unit will turn off.

As the unit powers on, it should immediately start showing the bottom.

Verify that the unit is not in the simulator mode. If the unit is in the
simulator mode, make sure that the transducer is connected to the wiring
harness.

To test the transducer and speed sensor installation, gradually increase

the boat’s speed while checking the unit operation. If the unit displays
intermittently or fails to display, verify that the transducer and speed sensor
are aligned parallel with the bottom. If necessary, adjust their heights until
the unit operates correctly. It may be necessary to make several adjustments
to ensure proper operation throughout the speed range. If the signals do
not improve, it may be necessary to move the transducer or speed sensor
to a different location.

When adjusting the depth of the transducer, make the adjustments in small
increments, like 1/8”. Placing the transducer or speed sensor too deep can
adversely affect the boat’s performance and increase the risk that they may
strike underwater objects.

If the Fishﬁ nder 160 Blue is in Simulator Mode, the message
“Simulator On” will be displayed along the bottom of the
screen. The message will be replaced by the “S” icon indicat-
ing that the unit is running in simulator mode.

Simulator Message and Icon

FF 160 B Rev B.indd

12/13/01, 2:49 PM

9

www.reelschematic.com

www.reelschematic.com

«
...
15
16
17
18
19
...
»

Содержание Fishfinder 160 Blue



















































Отзывы:

Нет отзывов

Похожие инструкции для Fishfinder 160 Blue

Бренд: FLIR Страницы: 136

Бренд: NorthStar Страницы: 32

Бренд: Fish Hawk Страницы: 16

Бренд: Navman Страницы: 37

Бренд: NorthStar Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды