background image

Arrival

: Sets an alarm to sound when you are within a specified 

distance or time from a turn or a destination.

Anchor Drag

: Sets an alarm to sound when you exceed a 

specified drift distance while anchored.

Off Course

: Sets an alarm to sound when you are off course by 

a specified distance.

System Alarms

Select 

Settings

 > 

Alarms

 > 

System

.

Alarm Clock

: Sets an alarm clock.

Device Voltage

: Sets an alarm to sound when the battery 

reaches a specified low voltage.

GPS Accuracy

: Sets an alarm to sound when the GPS location 

accuracy falls outside the user-defined value.

Sonar Alarms

Select 

Settings

 > 

Alarms

 > 

Sonar

.

Shallow Water

: Sounds when the water depth is shallower than 

the specified depth.

Deep Water

: Sounds when the water depth is deeper than the 

specified depth.

Water Temp.

: Sounds when the water temperature varies more 

than ± 2°F (± 1.1°C). Alarm settings are saved when the 

device is turned off.

NOTE: 

You must connect the device to a temperature-

capable transducer to use this alarm.

Fish

: Sets an alarm to sound when the device detects a 

suspended target.

 sets the alarm to sound when fish of all sizes are 

detected.

 sets the alarm to sound only when medium or large 

fish are detected.

 sets the alarm to sound only when large fish are 

detected.

Unit Settings

Select 

Settings

 > 

Units

.

System Units

: Sets the unit format for the device.

Variance

: Sets the magnetic declination, the angle between 

magnetic north and true north, for your present location.

North Reference

: Sets the direction references used in 

calculating heading information. True sets geographic north 

as the north reference. Grid sets grid north as the north 

reference (000º). Magnetic sets the magnetic north as the 

north reference.

Position Format

: Sets the position format in which a given 

location reading appears. Do not change this setting unless 

you are using a map or chart that specifies a different 

position format.

Map Datum

: Sets the coordinate system on which the map is 

structured. Do not change this setting unless you are using a 

map or chart that specifies a different map datum.

Time Format

: Sets a 12-hour, 24-hour, or UTC time format.

Time Zone

: Sets the time zone.

Daylight Savings Time

: Turns daylight savings time off or on.

Communications Settings

NOTE: 

Some settings and options require additional charts or 

hardware.
Select 

Settings

 > 

Communications

.

Serial Port

: Sets the input/output format for the serial port to 

use when connecting the chartplotter to external NMEA 

devices, computers, or other Garmin devices.

NMEA 0183 Setup

: Sets the NMEA 0183 sentences the 

chartplotter transmits, how many digits to the right of the 

decimal point are transmitted in a NMEA output, and how 

waypoints are identified (

NMEA 0183 Settings

, page 15

).

NMEA 0183 Settings

Select 

Settings

 > 

Communications

 > 

NMEA 0183 Setup

.

Sounder

: Enables NMEA 0183 output sentences for the 

sounder (if applicable).

Route

: Enables NMEA 0183 output sentences for routes.

Device Configuration

15

Содержание FF 650 GPS

























Отзывы: