Garmin Fenix 5x, Руководство пользователя

Страница: 35 / 49

34
F
Ē
NIX
®
5X
select Remove from Favorites .
• To delete the activity from the apps list, select
Remove .
Changing the Order of an Activity in the
Apps List
1 Hold MENU .
2 Select Settings > Activities & Apps .
3 Select an activity.
4 Select Reorder .
5 Select UP or DOWN to adjust the position of the
activity in the apps list.
Watch Face Settings
You can customize the appearance of the watch face
by selecting the layout, colors, and additional data.
You can also download custom watch faces from the
Connect IQ store.
Customizing the Watch Face
Before you can activate a Connect IQ watch face, you
must install a watch face from the Connect IQ store
(Connect IQ Features, page 29) .
You can customize the watch face information and
appearance, or activate an installed Connect IQ watch
face.
1 From the watch face, hold MENU .
2 Select Watch Face .
3 Select UP or DOWN to preview the watch face
options.
4 Select Add New to scroll through additional pre-
loaded watch faces.
5 Select > Apply to activate a pre-loaded watch face
or an installed Connect IQ watch face.
6 If using a pre-loaded watch face, select > ustomize .
7 Select an option:
• To change the style of the numbers for the analog
watch face, select Dial .
• To change the style of the hands for the analog
watch face, select Hands .
• To change the style of the numbers for the digital
watch face, select Layout
• To change the style of the seconds for the digital
watch face, select Seconds .
• To change the data that appears on the watch
face, select Data .
• To add or change an accent color for the watch
face, select Accent Color .
• To change the background color, select Bkgd.
Color .
• To save the changes, select Done .
Sensors Settings
Compass Settings
Hold MENU , and select Settings > Sensors &
Accessories > Compass .
Calibrate : Allows you to manually calibrate the compass
sensor (Calibrating the Compass Manually, page 34) .
Display : Sets the directional heading on the compass to
letters, degrees, or milli-radians.
North Ref. : Sets the north reference of the compass
(Setting the North Reference, page 34) .
Mode : Sets the compass to use electronic-sensor data
only (On), a combination of GPS and electronic-
sensor data when moving (Auto), or GPS data only
(Off).
Calibrating the Compass Manually
NOTICE
Calibrate the electronic compass outdoors. To improve
heading accuracy, do not stand near objects that
influence magnetic fields, such as vehicles, buildings,
and overhead power lines.
Your device was already calibrated at the factory,
and the device uses automatic calibration by default.
If you experience irregular compass behavior, for
example, after moving long distances or after extreme
temperature changes, you can manually calibrate the
compass.
1 Hold MENU .
2 Select Settings > Sensors & Accessories > Compass >
Calibrate > Start .
3 Follow the on-screen instructions.
TIP: Move your wrist in a small figure eight motion
until a message appears.
Setting the North Reference
You can set the directional reference used in calculating
heading information.
1 Hold MENU .
2 Select Settings > Sensors & Accessories > Compass >
North Ref. .
3 Select an option:
• To set geographic north as the heading reference,
select True .
• To set the magnetic declination for your location
automatically, select Magnetic .
• To set grid north (000º) as the heading reference,
select Grid .
• To set the magnetic variation value manually,
select User , enter the magnetic variance, and select
Done .
Altimeter Settings
Hold MENU, and select Settings > Sensors &
Accessories > Altimeter .