Garmin eTrexLegend TM, Руководство пользователя

Страница: 66 / 76

56
MapSource
Setup
Transferring MapSource Map Data
If you have purchased a GARMIN MapSource™
CD-ROM mapping program you may want to transfer
detailed map data before beginning use, to provide
your unit with maximum Find features and mapping
capability. The eTrex Legend accepts up to 8 MB of map
data from MetroGuide, Points of Interest, Fishing Hot
Spots, Topographic maps, Roads and Recreation, and
WorldMap mapping guides.
Map data transfer requires the use of a PC, a
GARMIN MapSource CD-ROM, and the PC Interface
Cable with RS-232 serial port connector supplied with
this unit. Follow detailed instructions for data transfer
in the MapSource User’s Manual.
GARMIN MapSource
CD-ROM’s offer a variety of
detailed mapping data and
navigation information.
MapSource is also an exellent
medium for storage and safety
backup of Personal Waypoints,
Routes and Saved Tracks.
See your GARMIN Dealer or
visit the GARMIN website at:
www.garmin.com
for information.
Transferring Map Data:
You can transfer detailed map data to the eTrex Legend from a GARMIN MapSource
CD-ROM. The eTrex Legend can accept up to 8 MB of data from any MapSource
program loaded on a PC and connected to the eTrex Legend Data Port. For this function
you need the eTrex PC Data Cable provided with your unit.
To transfer data:
1. Remove the Power/Data Port cover on the back of the unit by lifting up on the
protective cover on the back of the unit.
2. Connect the serial port connection on the cable to the PC serial port.
3. Connect the remaining cable connector to the back of the eTrex Legend by orienting
the slot on the connector with indexing bar on the back of the unit. Then, slide the
connector in place.
4. Turn on the eTrex Legend and follow instructions for map data transfer provided in
the MapSource User’s Manual.
Appendix D
190-00234-00_0C.indd 56 10/11/2002, 9:49:44 AM