Garmin eTrex HC series, Руководство пользователя

Страница: 14 / 54

0 eTrex HC series Owner’s Manual
B
aSIc
o
peratIon
To clear one or all proximity waypoints
from the list:
To remove a single entry, press ENTER . To
remove all waypoints from the list, press MENU
> Remove �ll .
To set proximity alarm tones:
1. Select
Proximity �larm Tones
(eTrex HCx
units only). The tone for alarms on the eTrex
HC units is pre-set.
2. Use the setup page on HCx units to assign
tones to the types of alarms listed. Speed Alerts
are obtained by using POI Loader.
( see page 16 ).
3. When you trigger an alarm, a tone sounds and
a “Near Proximity Point” message appears.
When outside the set radius, a “Leaving
Proximity Point” message is shown.
To turn proximity alarms on or off:
Press MENU twice > Proximity (eTrex HCx
and HC units) > Proximity �larm Tones (eTrex
HCx units) and check or uncheck the Proximity
�larms box.
Using the Find Menu
Find Menu with optional
MapSource data
Use the Find Menu to search for waypoints,
geocaches, cities, and exits in the eTrex basemap.
Additional icons appear depending on the optional
MapSource data loaded to the unit. Press and hold the
FIND key to open the Find Menu.
When you access a Find group list, it contains items
near your current location or the map pointer.
The options menu for each category contains search
options. Select a Category.