Garmin DriveAssist 50, Руководство пользователя

Страница: 9 / 30

markers and, as a result, may have limited functionality in low
visibility conditions.
The LDWS feature alerts you when the device detects you may
be crossing a lane boundary unintentionally. For example, the
device alerts you if you cross some solid painted lane
boundaries or cross into an incoming traffic lane. The LDWS
feature provides alerts only when your vehicle speed exceeds
64 km/h (40 mph). The alert appears on the left or right side of
the screen to indicate which lane boundary you crossed.
NOTE: For the best LDWS performance, you should set the
Camera Placement option to indicate the location of your device
in the vehicle.
Setting the Camera Placement
You can mount the device in the left, center, or right of your
windshield or dash. For the best LDWS performance, you
should set the Camera Placement option to indicate the location
of your device in the vehicle.
1
Select Settings > Camera > Camera Placement .
2
Select the location of the device.
Lane Departure Warning Performance Tips
Several factors affect the performance of the lane departure
warning system (LDWS). Some conditions may prevent the
LDWS feature from detecting lane departures.
• The LDWS feature provides alerts only when your vehicle
speed exceeds 64 km/h (40 mph).
• The LDWS feature does not provide alerts on certain types of
roads, such as highway ramps or merging lanes.
• The LDWS feature may not function properly if the camera is
incorrectly aligned ( Aligning the Camera , page 3 ).
• The LDWS feature may not function properly if the Camera
Placement option does not correctly indicate the placement
of your device in the vehicle.
• The LDWS feature requires a clear, continuous view of the
lane divider lines.
◦ Lane departures may not be detected when divider lines
are obscured by rain, fog, snow, extreme shadows, sun or
headlight glare, road construction, or any other visual
obstruction.
◦ Lane departures may not be detected if lane divider lines
are misaligned, missing, or heavily worn.
• The LDWS feature may not detect lane departures on
extremely wide, narrow, or winding roads.
Navigating to Your Destination
Routes
A route is a path from your current location to one or more
destinations.
• The device calculates a recommended route to your
destination based on the preferences you set, including the
route calculation mode ( Changing the Route Calculation
Mode , page 7 ) and avoidances ( Avoiding Delays, Tolls,
and Areas , page 8 ).
• You can start navigating to your destination quickly using the
recommended route, or you can select an alternate route
( Starting a Route , page 5 ).
• If there are specific roads you need to use or avoid, you can
customize the route ( Shaping Your Route , page 6 ).
• You can add multiple destinations to a route ( Adding a
Location to Your Route , page 6 ).
Starting a Route
1
Select Where To? , and search for a location ( Finding and
Saving Locations , page 8 ).
2
Select a location.
3
Select an option:
• To start navigating using the recommended route, select
Go! .
• To choose an alternate route, select , and select a route.
Alternate routes appear to the right of the map.
• To edit the course of the route, select > Edit Route , and
add shaping points to the route ( Shaping Your Route ,
page 6 ).
The device calculates a route to the location and guides you
using voice prompts and information on the map ( Your Route on
the Map , page 5 ). A preview of the major roads in your route
appears at the edge of the map for several seconds.
If you need to stop at additional destinations, you can add the
locations to your route ( Adding a Location to Your Route ,
page 6 ).
Starting a Route by Using the Map
You can start route by selecting a location from the map.
1
Select View Map .
2 Drag and zoom the map to display the area to search.
3 If necessary, select to filter the displayed points of interest
by category.
Location markers ( or a blue dot) appear on the map.
4 Select an option:
• Select a location marker.
• Select a point, such as a street, intersection, or address
location.
5
Select Go! .
Going Home
The first time you start a route home, the device prompts you to
enter your home location.
1
Select Where To? > Go Home .
2
If necessary, enter your home location.
Editing Your Home Location
1
Select Where To? > > Set Home Location .
2
Enter your home location.
Your Route on the Map
As you travel, the device guides you to your destination using
voice prompts and information on the map. Instructions for your
next turn or exit, or other actions appear across the top of the
map.
Navigating to Your Destination 5