Garmin Camper 785, Руководство пользователя

Страница: 7 / 34

Adding a Vehicle Profile
You should add a vehicle profile for each camper to be used
with your device.
1
Select Vehicle .
2
Select your vehicle type:
• To add a motorhome with a permanently attached
camper, select Motorhome .
• To add a motorhome pulling a trailer, select Motorhome
with Trailer .
• To add a camper pulled behind a passenger vehicle,
select Vehicle with Trailer .
3
If necessary, select your trailer type:
• To add a camper pulled using a standard hitch, select
Travel Trailer .
• To add a camper pulled using a fifth-wheel hitch, select
Fifth Wheel .
NOTE: This trailer type is not available in all areas.
• To add a boat trailer pulled using a standard hitch, select
Boat Trailer .
• To add a trailer pulled using a standard hitch, select
Trailer .
4
Follow the on-screen instructions to enter the vehicle
characteristics.
After you add a vehicle profile, you can edit the profile to enter
additional detailed information ( Editing a Vehicle Profile ,
page 3 ).
Car Profile
The car profile is a preloaded vehicle profile intended for use in
an automobile without a trailer. While using the car profile, the
device calculates standard automobile routes, and routing for
large vehicles is not available. Some features and settings
specific to large vehicles are not available while using the car
profile.
Switching the Vehicle Profile
You can manually switch to another vehicle profile at any time.
1
Select an option:
• Select
Vehicle .
• Swipe down twice from the top of the screen, and select
the vehicle profile icon, such as or .
2
Select a vehicle profile.
The vehicle profile information appears, including
measurements and weight.
3
Select Select .
Editing a Vehicle Profile
You can change basic vehicle profile information or add detailed
information to a vehicle profile, such as maximum speed.
1
Select Vehicle .
2
Select the vehicle profile to edit.
3
Select an option:
• To edit the vehicle profile information, select , and select
a field to edit.
• To rename a vehicle profile, select > > Rename
Profile .
• To delete the vehicle profile, select > > Delete .
Adding Propane Tanks
NOTE: This feature is not available on all product models.
When you add your propane tanks to your vehicle profile, the
device avoids routing through areas with propane tank
restrictions that may affect your route. The device also alerts
you when you approach areas that require you to shut off your
propane tanks.
1
From the vehicle profile, select > Propane Tanks > Add
Tank .
2
Enter the weight of the propane tank, and select Save .
Dash Cam
Aligning the Camera
WARNING
Do not attempt to align the camera while driving.
You should align the dash camera each time you mount or
reposition the device.
1
Select Dash Cam .
2
Tilt the device to align the camera.
The crosshairs should point straight ahead, and the horizon
line should be centered between the top and bottom of the
screen.
TIP: If the suction cup appears in the dash cam field of view,
you should move the hinged arm toward the suction cup.
Dash Cam Controls
NOTICE
Some jurisdictions regulate or prohibit use of this device. It is
your responsibility to know and comply with applicable laws and
rights to privacy in jurisdictions where you plan to use this
device.
You can control the dash cam using either the dash cam app or
the notification panel.
Select >
Dash Cam , or swipe down from the top of the
screen.
Select to save a dash cam recording.
Select to stop dash cam recording.
Select to start dash cam recording.
Select to enable audio recording.
Select to disable audio recording.
Dash Cam Recording
• While the dash cam is recording, it records continuously,
overwriting the oldest, non-saved video.
• You can start and stop dash cam recording using the dash
cam controls ( Dash Cam Controls , page 3 ).
• If you enable the Auto Record option ( Dash Cam Settings ,
page 20 ), the dash cam starts recording automatically when
the device receives power through the powered mount. This
is most useful when the mount is connected to an ignition
switched power source.
• When the device is removed from the mount or the mount
loses power, the dash cam stops recording automatically
after a 15 second delay.
Saving a Dash Cam Recording
You can save a portion of the recorded video to prevent it from
being overwritten by new video.
1
While the dash cam is recording, select > Dash Cam > .
The device saves the video footage before, during, and after
you select .
2
Select again to extend the saved recording time (optional).
A message indicates the amount of video footage to be
saved.
Dash Cam 3