Garmin BC 30, Быстрый старт

Страница: 5 / 62

BC30
TM
5
BC™ 30 Wireless Backup Camera
Instructions
Introduction
WARNING
See the Important Safety and Product
Information guide in the product box for
product warnings and other important
information.
Garmin
®
strongly recommends having an
experienced installer with the proper
knowledge of electrical systems install the
device. Incorrectly wiring the power
cable can result in damage to the vehicle or
the battery and can cause bodily
injury.
When connecting the power cable, do not
remove the in-line fuse holder. To
prevent the possibility of injury or product
damage caused by fire or overheating,
the appropriate fuse must be in place as
indicated in the product specifications.
In addition, connecting the power cable
without the appropriate fuse in place will
void the product warranty.
CAUTION
Always wear safety goggles, ear protection,
and a dust mask when drilling,
cutting, or sanding.
NOTICE
When drilling or cutting, always check what
is on the opposite side of the surface.
These installation instructions do not apply
to a specific vehicle type, and are
meant as a guide when installing this
product on your vehicle. For questions
specific to your vehicle, you should contact
the vehicle manufacturer.
Device Overview
Item Description
1
BC™ 30 receiver cable.
The GPS device must be
powered through this cable
to communicate with the
camera.
2
Transmitter
3
Camera
4
Camera mounting bracket
Tools Needed
• Drill and 9.09 mm, or size T (0.36 in.)
drill bit
• #2 Phillips screwdriver
• Screws, bolts, or cable ties (to secure
the transmitter)