Garmin 010-11146-00 - GPS Receiver Remote Control, Инструкция по эксплуатации

Страница: 3 / 80

Instructions EN–
EN
Packing List
Before installing your unit, confirm that your
package includes the following items. If any parts
are missing, contact your Garmin
®
dealer.
Standard Package
GHC 10 Remote
Control
Two GHC 10
Remote Control
cradles
Cradle mounting
screws
Belt clip button
Belt clip
Neck lanyard
Wrist lanyard
•
•
•
•
•
•
•
Tools Needed (to
surface mount the
cradle)
Phillips screwdriver
Drill and
1
/
8
in.
(3.2 mm) drill bit
•
•
About the GHC 10 Remote
Control
The GHC 10 Remote Control is an accessory
to the GHP 10 autopilot system. For complete
information on using the GHP 10 autopilot system,
as well as important warnings, see the
GHP 10/GHC 10 Quick Start Manual.
See the
Important Safety and Product Information
guide in the product box for product warnings and
other important information.