manualshive.com logo in svg

Garland P10GSFPBPFE, Руководство пользователя

Поделиться
Скачать
Garland P10GSFPBPFE Скачать руководство пользователя страница 19

User Guide

XtraTAP™ Portable Packet Broker | P10GSFPBPFE | 4.22.1

 

Network Settings

Upon the initial turn up via the serial interface the IPv4 address, IPv4 gateway, IPv6 address and IPv6

gateway may have been already established. The IPv4 and IPv6 management interfaces may be
enabled or disabled independently as well as both enabled or disabled simultaneously. If the IPv4
and IPv6 management interfaces are disabled simultaneously, access is only allowed via the serial
interface. Any modifications made to any setting option will cause GUI disruption for about 60 seconds.

Also note that modifying the management interfaces may cause network disruption if prior consideration

and planning have not been performed.

The default system network configurations are as follows:

IPv4 enabled
IPv4 address 10.10.10.200
IPv4 gateway 10.10.10.1
IPv6 is disabled.

Via the GUI, the following options may be displayed, modified, enabled or disabled.

IPv4 Enable/Disable

IPv4 Address

IPv4 Gateway

IPv6 Enable/Disable

IPv6 Address

IPv6 Gateway

SSL Certificate Loaded
Using Uploaded SSL Certificate

1. Select Network Settings.

The Network Settings panel will be displayed with the current configuration.

 IPv4 / Disable

1. Deselect Enable IPv4.

2. Select Save.

If the IPv6 management interface has not been enabled the GUI will display a

message “Disabling IPv4 and IPv6, GUI will disconnect. Are you sure?

3. Select OK.

 IPv4 Enable

1. Select Enable IPv4.

2. Enter the desired Address.

3. Enter the desired Gateway.

4. Select Save.

 IPv6 Enable

1. Select Enable IPv6.

Garland Technology  |  716.242.8500  |  www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

19

Содержание P10GSFPBPFE






































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды