Garland moisture+ MPGD10D, Руководство по обслуживанию

Страница: 36 / 80

Part # MPSM07 (03/24/08) Page 36
Minerals, particles and chemicals in your water supply can lead
to build up of deposits and lime in your water system . Garland
recommends that you closely follow the manufacturer’s
recommendations on changing and cleaning your water
filtration system .
Failure to provide and maintain an adequate water quality
system may cause damage to internal components and may
void your warranty.
MAINTENANCE
Users are cautioned that maintenance and repairs must
be performed by a Garland authorized service agent using
genuine Garland replacement parts . Garland will have
no obligation with respect to any product that has been
improperly installed, adjusted, operated or not maintained
in accordance with national and local codes or installation
instructions provided with the product .
With minor periodic maintenance your Garland oven should
provide satisfactory performance for many years . Any time
you require service or replacement parts to be installed we
recommend that you have all of your oven components
inspected and their performance checked . At least once each
year your oven should be inspected by a qualified service
technician to ensure your oven continues to operate at its
peak performance .
MOTOR CARE
The motor on your oven is maintenance free since it is
constructed with a self-lubricating sealed ball bearing . It
is designed to provide durable service when treated with
ordinary care . We have a few suggestions to follow on the
care of your motor . When the motor is operating, it cools
itself internally by air entering at the rear of the motor case,
provided the proper clearances are maintained .
Since the blower wheel is in the oven cavity it is at the same
temperature as the oven . If the motor is stopped while the
oven is hot, the heat from the blower wheel is conducted
down the shaft of the motor and into the armature . This
action could shorten the life of the motor .
We recommend at the end of the bake or roasting period,
when the oven will be idle for any period of time, or before
shutting down completely, that the doors be left open
slightly, and press the COOL DOWN switch on the control
panel .
Electronic Controls have an Auto Cool Down function that
will cool the oven cavity down to 150°F when the oven is shut
down at the end of operation
WATER SYSTEM