background image

Part # 4020897 (01/31/08)

Page 13

Fault

Possible Cause

Action to take through operator or 

operating personnel

After a longer permanent operating 

time, the heating switches off and on 

within minutes

Coil overheated, cooking area too hot

Switch cooker off, remove pan and wait 

until the cooking area has cooled off

Empty pan
Pan with overheated oil

Small metallic objects (e.g. Spoon) are 

heated up within the cooking area

Pan detection tuned incorrectly

Control logic board

  * To verify if the pan is suitable, use a permanent magnet and find out if it sticks on the bottom of the pan. If not, your pan is 

not suitable for induction cooking. Choose a pan which is recommended for induction cooking. Choose pan material suitable 

for induction appliances.

 ** The cooling-system (fan) starts to operate when the heat temperature exceeds 55°C/130°F. At heat temperatures higher 

then 70°C/160°F, the controller automatically reduces the power to keep the power unit in normal operating conditions. The 

cooker runs in a non continuous mode. This mode can be heard.

TROUBLE SHOOTING Continued

Cleaning

Common types of soiling and recommendations how to treat 

them:

Slight soiling, no burned residues

Wipe with a moist cloth (scotch), without cleaning agent

Lime deposits, caused by water which has boiled over

These spots can be removed with vinegar or a special 

cleaning agent

Grease filter

Clean this filter once a week by putting it in the dishwasher

Make sure that no liquid can enter in the induction unit. Do 

not clean the Cooker with a jet of water.

CLEANING AND SERVICING

Support

Good maintenance of the induction cooker requires regular 

cleaning, care and servicing. The operator has to ensure that 

all components relevant to safety are in perfect working 

order at all times.

The cooker has to be examined at least once a year by an 

authorized technician.

CAUTION  Do not open the cooker, dangerous electric 

voltage inside.

The cookers may only be opened by authorized personnel.

Содержание GMIU3.5

















Отзывы: