Garland GAS 159 E, Инструкция по эксплуатации

Страница: 34 / 100

English
34/100
English
35/100
machine is not working correctly.
Remember to always use the machine with clean
hands and without petrol and oil.
Clean the working area and remove any obstacles
that could cause accidents. Check the workplace and
remove all elements that could be at risk of being
propelled from the workplace towards other people.
Do not allow anybody to enter the working area.
This working perimeter is 15 metres and this is a
dangerous zone.
Never use the machine when on top of a ladder, in a
tree or in any other unstable surface.
When moving from one working area to the next, turn
off the engine.
Never let the machine unattended.
Do not use any accessories that are not originals and
that have not been recommended by the manufacturer.
Use of other accessories can cause accidents and can
be dangerous for the end user and those nearby as well
as causing damages to the machine.
Always follow the security rules that we indicate in the
manual.
7.1. HOW TO HOLD THE MACHINE AND GUIDE IT
WHILST WORKING
Whilst working, always place yourself behind the
machine and hold it firmly with both hands on the
handles.
7.2. SPEED REGULATION
This machine has a speed regulator with
which you can control the speed of the
blowing air and that of the vacuum air. To regulate the
speed turn the regulator right or left depending on
whether you want more or less speed.
7.3. WORKING WITH THE BLOWING FUNCTION
Always follow the security stipulations that we indicate
in the manual.
Start the machine with the machine on the ground,
place it on your back and aim the air flow towards
the leaves and materials to be pushed. Push all the
material towards one place which preferably should
be a corner.
Once all the material has been grouped for pick up,
turn the machine off, switch to vacuum function, start
the machine again and begins to suck the materials.
7.4. WORKING WITH THE VACUUM
Always follow the security stipulations that we indicate
in the manual.
Start the vacuum and vacuum the material.
When you feel the catcher is full, stop the machine,
unplug the machine from the mains, disconnect the
catcher and empty it.
Once the catcher is empty, connect again before
starting to work again.
7.5. AFTER USAGE
Once you stop using the machine.
1. Disconnect the machine releasing the switch
(¨O¨ closed position).
2. Disconnect the machine from the mains.
3. Clean any residues from the catcher and the tubes.