USER GUIDE
P1GCUA_mini | FieldTAP
DIP Switch Settings:
Mode
Switch 1
(Speed_1)
Switch 2
(Speed_2)
Switch 3
Duplex
Switch 4
LFP
Sync Mode
OFF
OFF
Sync Mode
Forces AUTO
ON Switch
has no effect
Sync Mode
Forces LFP ON
Switch has no
effect
Garland Technology's unique Synchronization Mode provides a plug-n-play zero configuration
design. Network ports [A] and [B] will synchronize to determine the highest supported network
speed, drop link across all ports, and then only advertise and link to the highest supported common
network speed on all ports.
1Gbps
ON
ON
ON = AUTO
OFF = FULL
ON = LFP ON
OFF = LFP OFF
100Mbps
OFF
ON
ON = AUTO
OFF = FULL
ON = LFP ON
OFF = LFP OFF
10Mbps
ON
OFF
ON = AUTO
OFF = FULL
ON = LFP ON
OFF = LFP OFF
How to Use:
Power up the device if you have the optional power supply, otherwise attach the device to
your computer/server with the provided USB cable. Windows 10, 8 devices should
immediately denote a high speed USB hub device connected. Windows Servers need to
update the OS and USB drivers.
Using one Ethernet cable insert cable into the LEFT (ingress) to the network device you wish
to see data flowing from, this could be ANYTHING from a wall port, router, switch, or VOIP
phone, etc.
Use the second cable to complete the segment to another port to complete the circuit.
This document is for informational purposes only. The information in this document, believed by Garland Technology to be accurate
as of the date of publication, is subject to change without notice. Garland Technology assumes no responsibility for any errors or
omissions in this document and shall have no obligation to you as a result of having made this document available to you or based
upon the information it contains. ©2020 Garland Technology LLC. All Rights Reserved.
Network TAPs + Packet B Inline Edge + Cloud Visibility | GarlandTechnology.com | +1 (716) 242.8500 | [email protected]
062122