USER GUIDE
P1GCUA_mini | FieldTAP
Please contact us if you require native drivers for your Linux
distro or Windows OS’s. Field TAP supports 32-bit versions of
MAC OS-X. Catalina OS is not supported.
Thank you for your recent purchase of
Garland’s P1GCUA_mini. This copper TAP
features a wide range of options and
convenience for use with applications in a
wide range jobs. This quick user guide we
hope will be of use to get you started quickly.
For more information please visit our website
for more information regarding this product.
Drivers
are available to download on our website. Download here:
garlandtechnology.com/fieldtap-downloads-drivers
After unpacking the device your should have the following:
USB 3.0 cable
Garland P1GCUA_mini
What you need additionally:
Cat 5e or Cat 6 cables (2)
Wireshark, Moloch, or other network monitor tools
Wireshark can be downloaded here for free.
* Before powering up the device please note the DIP switches on the back
of the device. Default out of the factory the device is set to 1,2,3,4 (on) in
the up. Any changes to the DIP switches WILL require you to power cycle
the device. Please see the end of this guide in regards to setting the device
for additional roles. The DIP switch looks similar to this found on the back
of the device next to the power supply plug in:
This document is for informational purposes only. The information in this document, believed by Garland Technology to be accurate
as of the date of publication, is subject to change without notice. Garland Technology assumes no responsibility for any errors or
omissions in this document and shall have no obligation to you as a result of having made this document available to you or based
upon the information it contains. ©2020 Garland Technology LLC. All Rights Reserved.
Network TAPs + Packet B Inline Edge + Cloud Visibility | GarlandTechnology.com | +1 (716) 242.8500 | [email protected]
062122
