![background image](http://html1.mh-extra.com/html/garland/aggregatortap-int1g10csa/aggregatortap-int1g10csa_install-manual_3620004006.webp)
INSTALL GUIDE
AggregatorTAP | INT1G10CSA
|
1.1.37
Under Setup Port Configuration Menu you can set the port speed, set LFP, disable Span mode for a
Network pair (Tap), and enable Sync Mode. Configuring the port to Forced Full Duplex prohibits the port
from responding to autonegotiate messages which requires the user to manually configure the port on the
device linked to the INT1G10CSA.
Note:
Failure Propagation (LFP) allows the link state to be mirrored to adjacent live network interfaces.
When the tap is in
SYNC mode then LFP is set to be enabled.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2021 Garland Technology, LLC. All rights reserved.
6