Remote Keypads
Up to four remote keypads may be fitted to the 490X control panel. Each Keypad offers
a 32 character backlit LCD.
A four core connection will be required between the control panel and remote
keypad(s), keypads may be in a 'daisy chain' or ‘star’ format.
Note:
680 Ohm resistor must be fitted to ONE RKP. If the RKPs are wired
in daisy chain format this should be the last RKP in the line.
Note:
Each keypad must be programmed onto the system in order for it to
be recognised by the system.
Note:
Depending on the variant of keypad fitted external G-Tag Proximity
Reader(s) may be fitted to each Remote Keypad.
Note:
Please refer to the back of this manual if the Control Panel has been
supplied with a 4 Wire Contour RKP (with added zones) for wiring
information.
Page
7
490X Engineer’s Reference Guide
- + -
STROBE BELL
RS485 REMOTE KEYP
AD PGM2
RED BLK
YEL
GRN D2 D1 0V 12V
BATT AC
- +
KEYP
A
D
CONNECTIONS
RS485 (RADIO EXP
ANDER)
CONNECTIONS
REMOTE
KEYPAD(S)
MAY BE WIRED
IN STAR OR
DAISYCHAIN
FORMAT
D2/B D1/A
0V 12V
D2/B D1/A 0V 12V
GTAG
PROXIMITY
READER(S)
Note: 680 Ohm
resistor should
be fitted to ONE
of the RKPs. If
RKPs are wired
in daisy chain
this should be
the last RKP in
the line,
680 Ohm
490X 1.qxd 11/07/2006 12:32 Page 7