Gardol 34.108.11, Оригинальная инструкция по эксплуатации

Страница: 17 / 252

GB
- 17 -
The chain saw mounting kit is allowed to be used
only on the supplied motor head.
The chainsaw with telescopic handle is designed
for lopping o ff tree branches. It is not suitable for
extensive sawing work, felling trees or sawing any
materials other than wood.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Cutter bar length: ................................... 200 mm
Max. cutting length: ................................ 170 mm
Chain pitch: .................................... 3/8“, 33 teeth
Chain thickness: .........................(0.050“) 1.3 mm
Sprocket wheel: ............................... 6 teeth, 3/8“
Cutting speed
at rated rpm: ...........................................3.76 m/s
Oil tank capacity: ................................... 125 cm3
Net weight without accessories: .................3.4 kg
Saw chain: ..............................Oregon 91P033X,
.......................................Kangxin 3/8 8050X33DL
Cutter bar: ....... Oregon 080NDEA041 (520089),
........................................ Kangxin AP08-33-507P
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with ISO 22868.
L
pA
sound pressure level ................... 81.05 dB(A)
K
pA
uncertainty .............................................3 dB
LWA sound power level measured .. 98.23 dB(A)
K
WA
uncertainty .............................................3 dB
LWA sound power level guaranteed ... 102 dB(A)
Wear ear-mu ff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with ISO 22867.
Handle under load
Vibration emission value a
h
= 0.947 m/s
2
K uncertainty = 1.5 m/s
2
The speci fi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the speci fi ed value
in exceptional circumstances.
The speci fi ed vibration value can be used to
compare the equipment with other electric power
tools.
The speci fi ed vibration value can be used for initi-
al assessment of a harmful e ff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
5. Before starting the equipment
Caution! Do not fi t the battery until the equipment
has been fully assembled and all the settings
have been actuated. Always wear protective
gloves when working on the equipment to protect
yourself against injury. Carefully unpack all parts
and check that they are complete (Fig. 1).
5.1 Fitting the chain saw mounting kit (for
use as a pole-operated pruner)
5.1.a Assembly of the cutter rail and the saw
chain
•
Undo the fixing screw (C) of the chain wheel
cover (Fig. 3).
•
Take off the chain wheel cover.
•
Lay the chain as shown in the groove which
runs around the cutter rail (Fig. 4/Item E).
•
Insert the cutter rail and chain as shown in
the mounting in the chainsaw (Fig. 5). At the
same time guide the chain around the chain
wheel (Fig. 5/Item K).
•
Attach the chain wheel cover (Fig. 6/Item C)
Anl_GATS_E_20_Li_SPK7.indb 17 Anl_GATS_E_20_Li_SPK7.indb 17 27.07.2017 15:02:16 27.07.2017 15:02:16