Gardner Denver RNC Series, Инструкция по эксплуатации

Страница: 9 / 24

9
3.3 Check separator daily to be sure automatic
drain is discharging.
NOTE: Units with two stage filtration have two sets of drains.
3.4 Blow down separator weekly by pushing test
button on control panel.
3.5 Rebuild drain mechanism annually.
To facilitate service, maintenance kits are available.
See page 21.
6. After making certain that o-ring inside top of bowl (and
on bayonet mount heads, wave spring) are in place,
reassemble bowl to head.
NOTE:
Make certain o-ring is generously lubricated. (Use
lubricant provided)
NOTE:
Wave spring ends should be pointed down to prevent
the wave spring from interfering with reassembly.
NOTE:
Threaded bowl to head connection, generously
lubricate threads with a high grade/temperate lubricant 150
°F, 66°C. (Use lubricant provided).
7. Disassemble condensate drain valve(s).
8. Rebuild drain valves using Genuine Parts. See page 21
for ordering information.
Model RNC100
Bowl
O-Ring
Wave Spring
Pneumatic Pilot
Operated Drain
Tube
Separator Element
or Optional Oil Removal
Element
Timer Drain Valve
(ONLY with I-Controller Level 2)
Models RNC125 thru RNC150
Separator Element
or Optional Oil Removal
Element
Wave
Spring
Bowl
O-ring
Timer Drain Valve - Standard
Models RNC200 thru RNC750
Separator Element or
Optional Oil Removal Element
Timer Drain Valve - Standard with I-Controller Level 2
Demand Drain - I-Controller Level 3 Only
Drain Quick Disconnect