Gardner Denver MH-C2 HYDRAPAK, Список запасных частей и руководство по эксплуатации и обслуживанию

Страница: 9 / 20

HYD-7-600 Page 7
SECTION 1
EQUIPMENT CHECK
Before uncrating, check the packing slip carefully to be sure all the parts have been received. All
accessories are listed as separate items on the packing slip, and small important accessories such as
relief valves can be overlooked or lost. After every item on the packing slip has been checked off,
uncrate carefully. Register a claim with the carrier for lost or damaged equipment.
Customers are cautioned to provide adequate protection, warning and safety equipment
necessary to protect personnel against hazards involved in installation and operation of this
equipment in the system or facility.
STORAGE
Your Gardner Denver® Hydrapak was packaged at the factory with adequate protection to permit normal
storage for up to six (6) months.
If the unit is to be stored under adverse conditions or for extended periods of time, the following additional
measures should be taken to prevent damage.
1. Store the cooler in a clean, dry, heated (if possible) area.
2. Make certain inlet and discharge air ports are tightly covered to prevent foreign material from
entering the hydraulic system.
3. All hydraulic fittings are zinc coated but should also be protected against rust and corrosion.
4. In high humidity or corrosive environments, additional measures may be required to prevent
corrosion of an hub and aluminum control block.