Gardner Denver L90 7.5A V4, Перевод оригинальной инструкции по эксплуатации

Страница: 47 / 76

Maintenance plan: Maintenance every 125 operating hours
Component Measure Necessary qualification Carried out
Cooler / fan Check and clean if nec-
essary
Maintenance personnel
Oil tank Drain condensate Maintenance personnel
Chart 8-2: Maintenance plan, very 125 operating hours
Maintenance plan: Service interval A - every 2000 hours run, but no less than annually
Component Measure Necessary qualification Carried out
Filter mats cooling air inlet Check, clean and replace as
necessary.
Maintenance personnel
Air filter Replace air filter Maintenance personnel
Oil filter Replace oil filter Maintenance personnel
Condensate drain Aftercooler, function check. Maintenance personnel
Electronic control unit Check for displayed mainte-
nance requirements.
Operator
Chart 8-3: Maintenance plan: Service C
Maintenance plan: Service interval B – Every 4,000 hours, but no less than annually
Component Measure Necessary qualification Executed
Customer operations log Check and adhere to operat-
ing parameters.
Operator
Electronic control unit Check fault statistics. Operator
General Maintenance / cleaning Maintenance personnel
Oil fine separator Replace Maintenance personnel
Switch cabinet cooling air inlet
filter
Replace. Maintenance personnel
Frequency converter cooling
air inlet filter (RS)
Replace. Maintenance personnel
FLUIDFORCE SCREW WAR-
RANTY LUBRICANT com-
pressor oil
Replace Maintenance personnel
Moisture sensor replacement
filter cap (RS) + e
Replace Maintenance personnel
Motor bearing lubrication Replace LC unit cartridge
(grease cartridge)
Maintenance personnel
Safety valve Function test at least once a
year
Maintenance personnel
Hoses and pipelines Check for leaks or as the case
may be, damage.
Maintenance personnel
Electrical wiring Check connections and condi-
tion.
Electrician
Compressor Maintain the compressor room
and surroundings clean.
Operator
Chart 8-4: Maintenance plan: Service D