Gardner Denver
1 Foreword
5
1 Foreword
1.1
About this manual
This manual contains information relating to both Fixed
Speed and Regulated Speed models. Throughout this
manual, where a section relates exclusively to one or
the other model, the symbol
(Fixed Speed) and
(Regulated Speed) are used respectively to indicate
their relevance.
Any values shown in screen shots are for illustrative
purposes only. They are not specific values for your
particular model of compressor.
At various stages throughout this manual, references
will be made to finding individual menu items. These
references are shown in the following format:
Display
screen tab > Next menu level > [next menu
level ...etc.] > menu item
.
The information given in this manual was correct at the
time of printing. However, based on Gardner Denver’s
policy of continuous product improvement, we reserve
the right to make modifications or changes without
notice.
This manual is valid from software version
DXL-DH(RS)-1.xx.
1.2
Selection and Qualification Of
Personnel; Basic Responsibilities
Work on/with the machine must be carried out by
reliable personnel only. Statutory minimum age limits
must be observed.
Employ only trained or instructed personnel. Clearly set
out the individual responsibilities of the personnel for
operation, set-up, maintenance and repair.
Ensure that only authorized personnel work on or with
the machine.
Define the machine operator's responsibilities, giving
the operator the authority to refuse instructions by third
persons that are contrary to safety regulations.
Do not allow persons to be trained or instructed or
persons taking part in a general training course to work
on or with the machine/unit without being permanently
supervised by an experienced person.
Work on the electrical equipment of the machine/unit
must be carried out only by a skilled electrician in
accordance with electrical engineering rules and
regulations.
1.3 Intended
Use
The installed GD PILOT TS controller is only designed
for use with the Gardner Denver D range of
compressors.
FS
VS