Gardner Denver EnviroAire 15, Оригинальное руководство по эксплуатации

Страница: 24 / 56

6. Transport and installation
22
6 Trans port and installation
6.1 Transport
DANGER
The compressor or parts of it may fall if
mistakes are made when lifting, and this will
put your life at risk. Safety devices my be
damaged if lifted incorrectliy.
•
Always observe the safety notes in
Section 4.5 of the user manual.
•
Never lift the compressor by or tie onto
its enclosure.
•
A suitable fork lift which complies with
local safety regulations must be used
when lifting the compressor.
•
The fork length of the fork lift must
correspond to the unit width (see
Section 12.2).
•
Keep the distance between the forks
(see Fig. 4) and their length in mind
when transporting the compressor.
•
All loose parts or parts which can swing
freely must be safely secured before the
unit can be lifted.
•
It is strictly prohibited to stand in the
danger zone of a lifted load.
•
Ensure that the transport load approach
is performed properly (according to the
user manual of the lifting device).
NOTICE
The doors and the cover must be removed
before lifting from the control side.
1
Fig. 4
Weights
The values listed below are approximate values, they
refer to a screw compressor unit including water fill:
EnviroAire VS 15: 1515 lbs
EnviroAire VS 22: 1556 lbs