![background image](http://html1.mh-extra.com/html/gardner-denver/emco-wheaton-e2110/emco-wheaton-e2110_installation-operation-and-maintenance-manual_3576578015.webp)
Instruction Manual
Top & Bottom Loading Arms
E2110, E2112, E2022, E2025
E2033, E2304, E2573, E2123,
E2313, E2121
- 13 -
9.5 Service Intervals
Service Interval
Component
Each
Loading
Every 6
Months
Annually
As
Required
9.6
Open Lubrication Points
•
9.7
Maintenance of Swivel Joints
O
•
9.8
Spring Cylinder Maintenance
•
9.9
Spring Cylinder Adjustment
•
9.10
Replacement and Disposal of
Spring Cylinder
•
9.11
Bolt Connections
X
9.12
Painting
•
9.13
Electrical Equipment
O
•
9.14
Loading Valve
O
•
9.15
Other Valve Types
O
9.16
Hose
O
•
9.17
Coupler
O
•
O
= Check for proper operation. Service the component only, if necessary.
••••
= Service as described in the according section of this manual.
X
= 6 months after commissioning or after 6 loadings, whichever comes earlier.
After 1
st
service check every other year only.
9.6 Open Lubrication Points
Please refer to the figure below for location of open lubrication points. Apply a
thin layer of lubricant every 6 months or as necessary depending on loading
environment.
Use the same lubricant which is listed in the loading arm drawing for open
lubrication points.