9
b. Adjustable Pipe Adaptor CP703.
1)
The adjustable pipe adaptor is used with the CP601 conduit frame adaptor. Install by inserting the
CP703 pipe adaptor into the conduit frame adaptor. The legs must be inserted until end hole is
aligned with the hole closest to the frame adaptor cross member. See figure 8.
To avoid damage to the CP703 pipe adaptor, do not mount to the frame
adaptor using the first hole. The two pieces require support by using the
entire length of the frame adaptor opening.
Figure 8
2)
Use of the CP703 pipe adaptor also requires the S8512 10-inch sheave for the rope to travel
across. The sheave must be mounted with one CP505 8-inch pin as shown in figure 9. (See figure
12 for optional method.)
To avoid damage to equipment, do not mount sheaves to CP703 using
the holes along the curved frame. The holes on the curvature are used
as alternate locations to attach the frame to the conduit coupler
adaptor CP702 with CP505 pins.
Figure 9
c. Coupling clamp frame CP702
1)
Coupling clamp frame CP702 is used to provide a connection between the conduit and the puller
frame. See figure 10.
